Performance Test of Some Selected Sediment Transport Formulas
Performance of some selected sediment transport formulas was tested using a parameter-sensitivity analysis and a series of numerical experiments with an imaginary channel data. Selection...

Practical Applications of 2-D Hydrodynamic Modeling
Two-dimensional hydrodynamic modeling capability has greatly impacted the hydraulics community and significantly altered the approaches to design and analysis of open channel systems....

Geomorphic and Sedimentologic Evaluation of a Proposed Flood Control Project, Truckee River, Reno, Nevada
Geomorphic observations, sediment data and shear stress analyses were integrated to evaluate the potential responses of the steep, coarse grained Truckee River to a proposed flood control...

The Development of a Plan of Study to Evaluate the Physical and Biological Effects of Increased Navigation Traffic on the Mississippi River
An integrity team prepared a Plan of study (POS) that represents the first comprehensive effort on the Upper Mississippi River (UMR), to identify and quantify impacts associated with commercial...

Experimental Study on the Hydraulic Characteristic and Trapping Efficiency of a Vortex Tube Sediment Trap
In this paper, an expression of water extractor ratio of a vortex tube has been obtained according to the principle of energy conservation and transformation; based on the feature of sediment...

Discussion of a Three-Dimensional Hydrodynamic Model of the Upper Chesapeake and Delaware Bays
A time-varying three-dimensional (3-D) numerical model of the Upper Chesapeake and Delaware Bays has been developed to address the impact of deepening the Chesapeake and Delaware (C&D)...

Numerical Accuracies in Steady Open Channel Flow
The authors have reviewed the accuracy of the individual terms and formulations of the conservation of energy equation as used within the constraints of steady open channel flow modelling....

Momentum and Kinetic Energy Coefficient Research?Ramp Flumes
In October 1984. Reclamation Hydraulic Branch staff members investigated the operation of the A-Canal ramp at Klamath Falls, Oregon. The ramp flume was completed in 1983 as a water measurement...

Delineation of Ordinary High Water
'Ordinary high water' is used in a court of law to delineate the extent of land ownership of adjacent riparian owners on navigable rivers. The most appropriate...

Basin-Wide Stormwater Management in Pennsylvania?A Case Study of Hydrologic Performance Standards
Performance standards in the form of 'release rates' are developed using hydrologic computer models. This basin-wide approach to stormwater management considers...

Next-Generation Local Scale Hydromet Forecasting System
Research and development work is being conducted for the National Weather Service on a new-generation flash flood monitoring and forecasting computer workstation. The workstation represents...

3-D Cavity Flow Analysis by a New Fractional Step Method Based on the Finite Element Method
This paper describes a new finite element scheme for solving the time-dependent incompressible viscous fluid flow expressed in terms of the Navier-Stokes equations. The main feature of...

Experiences With a Supercomputer
The advent of ever faster and ever larger computers is opening new areas of scientific study. Within this computational revolution, however, are real people trying to cope with the vagaries...

Three-Dimensional Model of a Stratified Estuary?St. Andrew Bay System, Florida
A three-dimensional modal is applied to a northwest Florida estuary to provide the initial insights into the circulation and flushing patterns of the system. The model, developed by the...

Microcomputer Applications in Transportation III
This proceedings consists of papers presented at the International Conference on Microcomputers in Transportation which was held on June 21-23, 1989 in San Francisco, California. They...

OTEC's subsurface discharges of Deep Ocean Water: Modelling Their Effects on the Primary Production
The French project of a shore-based OTEC pilot plant (5 MW) at Tahiti gave the opportunity of simulating the ecological effects of a small, man-made upwelling in coastal-tropical oligotrophic...

Overview: Steam-Water Phase Change in OTEC Systems
This paper presents an overview of the thermodynamics and the heat and mass transfer processes occurring in OTEC systems utilizing seawater as the working fluid....

Seawater Experimental Results of Direct-Contact Condensation for OC-OTEC Applications
Tests of a direct-contact condenser (DCC) for open-cycle ocean thermal energy conversion systems (OC-OTEC) have been conducted using seawater and exchanging up to 1.25 MWth...

A Semi-Empirical Model for an OC-OTEC Spout Flash Evaporator
A phenomenological model for the thermal-hydraulics of a spout flash evaporator is presented in this paper. The model considers the two-phase flow behavior both in the spout and in the...

Noncondensable Gas Composition and Outgassing Rates in the Open-Cycle OTEC System with Direct-Contact Condensation
This paper will present the results of recent measurements of noncondensable release from an open-cycle ocean thermal energy conversion (OC-OTEC) system in a direct-contact condensation...

 

 

 

 

Return to search