ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Pipeline Leak Detection and Location
A real time pipeline leak detection and location system has been developed. This system consists of a numerical model for transient flow, two sets of pressure and flow measurement equipment,...

Valve Control to Avoid Column Separation in a Pipe
Maximum pressures in a pipeline can be reduced significantly by closing the valve in an optimal manner. Such an optimal valve closure policy may result in some situations in minimum pressures...

FE Elastic Analysis of Measured Earth Pressure on Buried Rigid Pipes in Centrifuged Models
FE elastic analyses of earth pressure on buried rigid pipes yielded results that agreed well with the earth pressure measured in 42 centrifuged models, confirming both the reliability...

The Effect of Compaction on Buried Flexible Pipes
This contribution presents an analysis of the installation of flexible pipes in granular soil. The deformation of the pipe cross section is measured in field and laboratory tests. It is...

Kinematic Models of Extensional Structures: Seismic Implications
Kinematic models can relate faults of different types and different positions within a single dynamic system and thereby offer the potential to explain the disparate seismic activity characteristic...

Iodine Transport Through the Soil-Plant-Atmosphere Continuum
The environmental assessment of the geological disposal of Canadian nuclear fuel waste involves transport modelling of radionuclides through the biosphere. Iodine-129 is a major fission...

Simulation of Reactive Chemical Transport in a Varying Thermal Field with Reaction-Flow Coupling
A computer program, THCVP, simulates coupling between advective/diffusive solute transport and chemical reactions, coupling of the reactions to heat transport, and feedback from precipitation/dissolution...

Simulation of Radionuclide Retardation at Yucca Mountain Using a Stochastic Mineralogical/Geochemical Model
This paper presents preliminary transport calculations for radionuclide movement at Yucca Mountain using preliminary data for retardation parameter distributions based on mineral distributions....

Optimal Route Selection for High Level Nuclear Waste Transport Based Upon Radiological Risk
The purpose of this paper is to demonstrate route optimization based directly upon the minimization of radiological risk as computed from local conditions. An operational impact analysis...

Outline of Performance Assessment Study on Geological Isolation System in Japan
The goals of current R&D activities are to ensure the feasibility of geological isolation of HLW in Japan and then to establish the social acceptance. In order to attain these...

Evaluation of Near-Field Thermal Environmental Conditions for a Spent Fuel Repository in Tuff
A repository heat transfer analysis is being performed by the Pacific Northwest Laboratory (PNL)^a for the U.S. Department of Energy's...

A Numerical Study of Some Effects of Nuclear Fuel Waste Vault Construction and Closure on Evolution of Groundwater Flow Paths in the Geosphere
We have performed a series of three dimensional finite-element simulations on the sensitivity of the groundwater flow paths and travel times in a conceptual hydrogeological model with...

Three-Dimensional Plume Dynamics in the Vadose Zone: PORFLO-3 Modeling of a Defense Waste Leak at Hanford
In 1973, approximately 450 m³ of liquid containing radioactive and chemical wastes leaked from the 241-T-106 single-shell tank into the vadose zone...

Geochemical Modeling: An Integrated Approach to Nuclear Waste Disposal Issues
To meet nuclear waste repository licensing requirements, the response of repository components and of the enclosing host rocks and fluids to temperature fluctuations, fluid flow, radionuclide...

Simulation Modeling of Subsurface Development
This paper discusses the use of simulation modeling in analyzing subsurface development activities and estimating associated costs at the Yucca Mountain candidate repository site. Described...

Systems Models for Predicting Radioactive Waste
This paper illustrates how a model can be constructed to analyze the growth of accumulated spent Light-Water-Reactor fuel using a technique from systems theory which has proved to be capable...

Near-Field Modelling for the Safety Assessment of French High-Level Waste Repositories
In assessing the safety of a French high-level waste repository, the fluxes of radionuclides released by the near-field into the geosphere are modelled by the CONDIMENT source code. This...

Optimization Method for Dimensioning a Geological HLW Waste Repository
This method was developed by the CEA to optimize the dimensions of a geological repository by taking account of technical and economic parameters. It involves optimizing radioactive waste...

Trends in Waste Management Program Costs: An Evolution of Estimating Methods and Results
The purpose of this paper is to present a summary of how the program cost projections contained in the five TSLCC analyses performed to-date and the estimating methods used to make these...

The Role of Sensor Directed, Model-Based Control in Robotic Handling of Nuclear Waste Casks and Materials
This paper discusses the results from several projects at Sandia National Laboratories investigating the application of intelligent machine technologies to remote handling of nuclear waste...

 

 

 

 

Return to search