Secondary Circulation Data Acquisition System
A computerized field data collection system was developed for a project investigating secondary circulation in natural rivers. The instrumentation includes a Commodore mini-computer with...
Electronic Worksheet Applications in Hydrology and Hydraulics
Spreadsheet software packages are available for virtually all micro computers in use today. Although they are quite often thought of as business tools, their usefulness as engineering...
A Low-Cost, Microcomputer-Based Field Data Acquisition System
This paper discusses the selection and development of a micro-computer-based data acquisition system used for collecting aquifer test data. Primary components of the data collection system...
Microprocessor-Based Data Acquisition Systems
The application of microprocessor-based data acquisition systems to laboratory experiments and field tests is discussed. The importance of the system design and hardware selection is emphasized....
Measurement of Hydraulic Conductivity Variation
For a confined, sandy aquifer, the dependence of the horizontal hydraulic conductivity on the vertical coordinate has been measured using single-well tracer injection/recovery experiments....
Instrumentation for an Uplifting Ice Force Model
Pile-supported, light duty structures are especially vulnerable to the uplifting forces. To evaluate the parameters that control the magnitude of the uplifting force a laboratory model...
Littoral Environment Observation Program
This paper presents a method for determining the longitudinal, transverse, and vertical dispersivities of a thick aquifer for a free convection tracer test using only measurements from...
Ground-water Modeling on Small Computers: Past, Present, and Future
The paper reports on research that concerns the possible development of numerical models being able to simulate practical cases of Oil Spill Migration (OSPIM) in soils. Such models can...
Automated Analysis of High Accident Locations
Identification of high accident locations and associated accident causative factors as well as determination and evaluation of appropriate remedial measures at these sites are continuing...
Shear Design of Masonry Walls
The paper presents a summary of a research project carried out at the Swiss Federal Institute of Technology Zurich to develop a design method based on the ultimate strength of masonry...
Wall/Floor-Slab Interaction in Brickwork Structures
The paper summarises the results of three series of tests on sections of brickwork structure carried out with a view to determining the characteristics of wall/floor slab joints in terms...
Tensile Fracture and Fatigue of Cement Stabilized Soil
Portland cement stabilized soil is widely used as a base material for roads, airfields, and similar structures. Cracking in this material is studied using fracture mechanics concepts....
Masonry Rehabilitation: Practice and Research
The rehabilitation of masonry buildings is a major construction activity in the United States. The available techniques and evaluation methodologies are limited to visual investigation...
Prestress and Cracking Problems in Concrete Structural Components of an Elevated Rail Transit Guideway System
In 1983 the Department of Transportation evaluated the quality of construction of selected structural components on the Dade County Transportation Administration METRORAIL elevated guideways....
Damage Tolerance Assessment of Commercial Airframes
The regulatory authorities now require that commercial transport aircraft structural design be based on a damage tolerance philosophy. A brief history of the development of the regulations...
Tension-Compression Test of a Concrete Specimen Via a Structure Damage Theory
The concrete sample is assumed to consist of a large number of aggregates and cement paste. Their material properties are assumed to be perfectly elastic. The effective elastic property...
Effect of Voids on Creep Rate and Strength
The classic macroscopic Kachanov-Rabotnov model of material damage due to voids is reviewed. Detailed analyses of bulk mechanical properties of dilutely voided materials with certain,...
On Cyclic Testing with Thin Long Hollow Cylinders
The hollow cylinder device has emerged in recent years as an important tool in the investigation of the dynamic behavior of soils. This paper reviews the stress conditions present in the...
Liquefaction Flow Failure of Silty Sand by Torsional Cyclic Tests
The use of undrained strain-controlled cyclic torsional loading of anisotropically consolidated triaxial specimens (CyT-CAU tests), is proposed for evaluating liquefaction flow failure...
Torsional Simple Shear Apparatus for Drained and Undrained Cyclic Testing
Since a cyclic triaxial compression apparatus was first used to study liquefaction of saturated sandy soil, many different types of cyclic shear devices have been used to investigate drained...
Return to search