Fatigue/Fracture Reliability and Maintainability of Structural Systems: A Method of Analysis
Fatigue and fracture of structural components are the principal modes of failure for those structural systems that are dominated by tensile dynamic (oscillatory) loads. As the structure...
Response of Secondary Systems to Short Duration Stochastic Input
Techniques have been developed for evaluating the mean-square response of systems to non-stationary loads. To gain insight into the response behavior, approximate expressions have been...
An Advanced First-Order Method for System Reliability
This paper proposes an iterative first-order method for accurate estimation of the joint failure region of two nonlinear limit states. Current methods use either a first-order approach...
Probabilistic Rotordynamics Analysis Using an Adaptive Importance Sampling Method
A methodology is developed to compute the probability of instability of a rotor system that can be represented by a system of second-order ordindary linear differential equations. The...
A Systems Reliability Approach to the Safety of Steel Connections
A methodology is presented to determine the probability of failure of steel connections using a systems approach. Results indicate that connection safety evaluations which do not use this...
A Two-Stage Safety Assessment Methodology for Construction Activities
The control of construction activities requires the evaluation of the condition of the control attributes of interest. In order to develop the required methodology, a model of the construction...
Time-Variant System Reliability Analysis Using Response Surface Methodology and Fast Integration
An approximate method is presented to solve the structural reliability problem of complex structural systems subjected to time-variant loads where the parameters of the structural system...
First-Excursion Probability of Uncertain Structures
The first-order reliability method (FORM) is used to estimate the first-excursion probability of uncertain structures subjected to deterministic dynamic loads. An algorithm is developed...
Risk Based Structural Optimization
Risk based structural optimization problems for structural systems are formulated on basis of a so-called risk index. The risk index is defined as a consequence modified reliability index...
Reliability-Based Optimization Using Sequential Quadratic Programming
This paper proposes a method for reliability-based optimization of large structures using the Stochastic Finite Element Method, including both component and system reliabilities. In SFEM,...
Structural System Design under Uncertainty Via Pareto Optimization
Structural systems are generally designed under safety, serviceability and economy requirements. The single objective optimal design problem of both deterministic and nondeterministic...
Groundwater Management in Southern Florida
A water supply plan was developed by the South Florida Water Management District (SFWMD) for Hendry County, Florida as part of the Lower West Coast Water Supply Plan. In the course of...
?H and ?4C as Tracers of Ground-Water Recharge
Surface spreading of water from the Santa Clara River is used to recharge aquifers underlying the Oxnard Plain. These aquifers are divided into an upper system about 400 feet thick, and...
Evapotranspiration Data Management in California
This paper will discuss components of the California Irrigation Management Information System (CIMIS). CIMIS is an automated agricultural weather network operated by the California Department...
Use of the TETrans Model in Predicting ET Effects on Groundwater Quality
Recently Corwin and Waggoner (1991) developed a contaminant transport software package referred to as TETrans, (acronym for Trace Element Transport). TETrans is a useful preliminary assessment...
Importance of ET on Colorado River Water Quality
Salinity is a major problem in the Colorado River. About 37 percent of the salt loading is contributed by irrigated agriculture activities. Deep percolation and seepage from irrigated...
Irrigation Project Modernization
Project modernization for sustainable irrigation requires a design and operation plan which will provide water deliveries with flexibility and reliability at each level within the system....
Technology Transfer Lessons from a U.S. Water District
An interceptor canal will be constructed near the end of eight laterals to collect and transport operational discharge and returned farm deliveries to a reservoir for temporary storage....
Greenhouse Irrigation Technology Transfer in Spain
In recent years, an intensive horticultural production system using unheated, plastic greenhouses has been widely adopted in the Mediterranean basin. Greenhouses now occupy more than 15,000...
Simulating the Effects of Deficit Irrigation for Furrow Systems
The distribution of irrigation water across a field can dramatically affects management of furrow irrigation systems as water supplies become limiting. To assess management strategies...
Return to search