Innovations for NDT of Concrete Structures
The proposed paper presents three recent innovations for sonic and ultrasonic Non-Destructive Testing (NDT) of concrete structures which greatly increase the utility and speed of many...
Unidirected Twined-Strand Composites and Their Uses
Twined strand composites are a new class of unidirected continuous-fiber-reinforced composite materials where the orientation of the continuous fibers is a twine of unidirected helically...
Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...
Full Scale Tests on Concentrically Loaded Fiber-Reinforced Pultruded Columns
This paper briefly reports on the experimental investigation in connection with the short term behavior of pultruded structural members under concentric loading. In particular, results...
Glass-Fiber Reinforcing Rod: Characterization and Application to Concrete Structures and Grouted Anchors
This paper presents the physical and mechanical characteristics of a new glass-fiber reinforcing rod which was developed to be used as a rebar for concrete structures or a tendon for grouted...
Splice/Development Length Requirements for FRP Grids Used in the Structural Reinforcement of Concrete
The research presented in this paper program was directed towards determining development length and splice requirements for FRP grids used in the reinforcement of concrete structures....
Hybrid (FRP+Steel) Reinforcement for Concrete Structures
The most popular method to prevent corrosion of steel rebars and prestressing tendons is epoxy coating. This paper presents an alternative approach consisting in the combination of a fiber-reinforced-plastic...
Investigation of the Behavior of Reinforced Plastic Columns with Concrete Core
This paper describes an experimental investigation into the behavior of reinforced plastic columns with tubular (hollow) sections. The columns were pultruded and had a cross-section which...
Behavior of Concrete-Graphite/Epoxy Sections in Composite Bridge Girders
The focus of this work is on the behavior of composite bridge girders constructed from carbon-fiber-reinforced-plastic sections and concrete slabs. The study examines four-point bending...
Structural Performance of Hardwood-Metal Composite Beams
This research examines the deflection characteristics of layered timber/steel composite beams with hopes of applying such principles to large timber structures such as highway bridges....
Sprayed-Zinc Galvanic Anodes for the Cathodic Protection of Reinforcing Steel in Concrete
Corrosion of reinforcing steel bars (rebars), due to penetration of chloride ions from seawater affects the substructure of many bridges in marine service. In a new, low cost control method,...
Probabilistic Mechanics and Structural and Geotechnical Reliability
This proceedings consists of summary papers for the thirty-six technical sessions of the 6th ASCE Specialty Conference on Probabilistic Mechanics, and Structural and Geotechnical Reliability....
Embankment Dams
James L. Sherard Contributions
This volume is dedicated to the memory of Dr. James L. Sherard, who made many contributions to embankment dam engineering. Twenty-one of his papers related to this topic were selected...
Portrait of a Manager
Although some are born leaders, most managers are actually created. In a perfect world, the young engineer would receive a bachelor of science degree in civil engineering, specializing,...
Evaluation of Seismic Vulnerability of Highway Bridges in the Eastern United States
For high risk seismic zones such as California, the state-of-the-art in earthquake resistant design for new highway bridges has been well advanced, especially since the damaging 1971 San...
Response of Model Pile Groups to Strong Shaking
The dynamic responses of small model pile groups to strong shaking obtained primarily from shake table tests are described and analyzed. As a basis for understanding pile group response,...
Seismic Pile-Group?Structure Interaction
A detailed multi-step procedure is outlined for a complete seismic soil-pile-foundation-structure interaction analysis, within the format of kinematic-inertial decomposition. Newly-developed...
Cone Models for a Pile Foundation
A single pile in a soil halfspace is modeled for dynamic excitation with disks and their corresponding double cones. This simple one-dimensional strength-of-materials approach provides...
The Superposition Approach to Pile Group Dynamics
A general three-dimensional boundary integral formulation for pile groups is used to obtain a set of dynamic interaction factors for a number of soil profiles and for a wide range of pile...
An Alternative Analysis of Vibration Tests on Two Pile Group Foundations
Published quick-release horizontal vibration tests on two pile group foundations supporting large transformer banks are analyzed in this paper using the dynamic impedance approach embodied...
Return to search