Cost-Effective Arctic Concrete Structures
The economic development of offshore Arctic petroleum fields dictates that Arctic structures be both cost-effective and deliverable with minimum lead time. Concrete structures are typically...
Earth Pressure on Underground Rigid Pipe in a Centrifuge
A series of centrifugal model tests on underground pipes that simulate the actual construction process were carried out to investigate the earth pressure concentration onto the pipe (particularly...
Biggest Highway Rebuild
The reconstruction of the Wisconsin Interstate 90 and 94 involved 32 miles of 6-lane pavement. Most of the concrete aggregate for the job was recycled concrete pavement and all pavement...
Innovtive Designs for Low-Level Nuclear Waste Disposal Trenches
Shallow land burial of low-level nuclear wastes presents many problems that are within the scope of civil engineering analysis and design. This paper presents the results of a U. S. Nuclear...
Mixing Steel and Concrete
For highrise structures, mixed steel-concrete systems are more efficient and cost less than either material alone. The two design approaches are exterior tube structures and core braced...
A Damage Function Using Structural Response Measurements
A new damage function is proposed that expresses seismic damage in terms of the range and number of cycles of plastic deflection experienced by a structure. This and other damage functions...
Concepts and Methods in Reliability-Based Structural Optimization
This paper presents an overview of the major concepts and methods used in reliability-based structural optimization. New formulations related to multicriteria optimization are developed....
Damage Model for Buildings Subjected to Earthquakes
A model based on random vibration method is developed for assessing building damage to earthquakes. The damage of reinforced concrete structures is expressed as a linear combination of...
Probability-Based Load Criteria for Structural Design
Load criteria for use in limit states design of structures are developed using probabilistic methods. Statistical data on load and strengths are integrated by the reliability analysis...
The Role of the Quality Assurance Management on a Large Commercial Project
The role of the quality assurance manager on a high rise project being built on a tight time schedule is a challenging and diversified assignment. It is made especially difficult when...
International and Educational Aspects of Watershed Management
International donor agencies involved in furnishing technical and economic assistance for increasing food and fiber production are focusing their attention towards rain-fed agricultural...
Embankment Seepage Control Design and Construction
For seepage control features of embankment dams, design criteria and construction practice is reviewed as it is reflected in the experience of the U. S. Army Corps of Engineers. The generally...
Seepage Control at Cochiti Dam, New Mexico
Significant design data, design assumptions and computations, and performance of the seepage control features provided at Cochiti Dam are summarized in this paper. The dam is a rolled...
Soldier Creek Dam Foundation Drainage
A possible mode of failure for Teton Dam, piping of erodible core material through unsealed foundation joints, was also concluded as being possible at Soldier Creek Dam, Utah. Evaluations...
Seepage in the Unsaturated Zone: A Review
This paper briefly reviews the procedures whereby the seepage rate, depth of penetration of nonreactive pollutants, and the depth of the wetting front can be calculated when the assumption...
Containment of Textile Waste Using a Geomembrane
A wastewater treatment plant for a textile mill incorporated two 2. 7 million gallon aeration ponds which had originally been lined with clay. The clay liner leaked and caused the formation...
Seepage Control for Embankment Dams USBR Practice
The current Bureau of Reclamation approach to seepage assessment, analysis, and design for embankment dams is described. The advantages and appropriate applications for the analysis programs...
Permanence of Chemically Grouted Sands
Test specimens were prepared with one of three uniformly graded sands of a fine gravel and injected with one of five silicate or two polyacrylic grouts. The polyacrylic grouts showed no...
Grout Penetrability
The ability of a grout to penetrate a formation is always a selection requirement for projects in which fracturing is undesirable. The major grout properties affecting penetrability are...
Embankment Foundation Densification by Compaction Grouting
Compaction grouting is an attractive alternate for in-place densification of liquefiable soils below existing structures. Compaction grouting application concepts and procedures are presented...
Return to search