Information Entropy and Environmental Engineering
Environmental engineering decisions are often made with limited information. In such cases it is useful to express uncertain quantities with a probability distribution. The use of information...
Concrete Gravity Dam Cracking Analysis Methodology
This paper describes a methodology for the prediction and evaluation of cracking behavior in concrete gravity dam's for use in periodic safety investigations as outlined in...
Three Dimensional Modeling of Concrete Dams with Cracks Using Boundary Element Methods
Determining uplift pressure distributions in cracks in a concrete dam requires coupling between crack hydraulics and the stresses and displacements occurring in the rock and the concrete...
Avoiding Vibration in Penstocks
One objective of this paper is to indicate the potential sources of pressure pulsations within a hydraulic conduit system and the range of forcing frequencies associated with these sources....
Physical Hydraulic Modeling for Construction of New York State Dam Hydroelectric Project
The New York State Dam is located on the Mohawk River near its confluence with the Hudson River. Downstream from the dam, the river flow is divided into four main channels as the water...
Vibration of Penstocks in Hydroelectric Installations
In many penstocks and pump discharge lines of turbines and pumps, pipe vibrations have been observed. Many of these installations have blade and vane arrangements other than the classic...
Some Unusual Vibrations in Hydro Machinery
Most hydro machinery engineers have read the textbook cases of self-exited and flow induced vibrations. Usually such textbook vibrations are only found in the text book! In the real world,...
Tidal Flooding Analysis, San Francisco Bay
Many leveed areas adjacent to San Francisco Bay are potentially subject to tidal flooding. In response to this concern, Congress authorized the U.S. Army Corps of Engineers to conduct...
Three-Dimensional Velocity Distribution at Open-Channel Diversions
A study is underway to develop an improved understanding of the 3-D flow pattern at 90? diversions. The main goal is to explain, via the velocity distribution, the behavior of sediment...
Flood Control Design for Development on Alluvial Fans
Hydrology, debris production, sediment transport and hydraulic studies were conducted to provide flood control for a development within an alluvial fan floodplain. Innovative techniques...
Temperature Rise, Bank Erosion, and Jet Velocity Effects of Submerged Multiport Diffusers in an Estuary
Temperature distributions, potential bank erosion, and jet velocity and trajectory of submerged multiport diffusers were predicted as part of the permitting process for an fossil fuel...
Design of a Stratified Cooling Channel
Cooling ponds are used for managing waste heat discharges. Cooling ponds are, however, expensive to construct and operate. A cooling channel is studied as an alternative means of managing...
Modelling Longitudinal Temperature Distribution in TVA Reservoir System
A one-dimensional model has been developed for computation of water temperature in the TVA reservoir system. The model has been successfully used in evaluating the impact of incremental...
Spatially Varying Velocity Distribution in Non-uniform Open Channel Flow
The spatial variation of velocity distribution in non-uniform flows were studied, within the framework of a velocity distribution model derived by a probabilistic formulation and entropy-maximization....
Chesapeake Bay Data Set for Three-Dimensional Hydrodynamic Model Verification
A comprehensive data set representing September 1983 conditions on the Chesapeake Bay has been assembled and is proposed as a possible data set for inclusion in the work of the ASCE Task...
The Dilemma of Measuring Small Pressure Changes in a Settling Tube
A compact settling tube was developed to determine fall-velocity and particle-size frequency distributions and specific gravities of sand-range sediment samples by means of direct measurements...
Return Velocities Induced by Shallow-Draft Navigation
Return velocities are caused by the displacement effects of vessels as they travel in navigation channels. Numerous return velocity equations have been developed for relatively small channels...
Turbulence and Reynolds Stress Distribution in a Natural River
Turbulence characteristics of ambient flow velocities and their comparison with those generated by the movement of barge traffic within the channel border area in a navigation waterway...
Uncertainty Quantification in Water Distribution Parameter Estimation
Calibration for water distribution system model parameters is usually undertaken with a minimal amount of field measurements so additional pseudomeasurements are assumed. Both the actual...
Measurement of Wave-Induced Turbulent Flow Structures Using Digital Image Sequence Analysis
The turbulent flow in water close to the wavy wind-stressed water surface has been examined quantitatively in a large circular wind-water tunnel with a flow visualization method using...
Return to search