Development of Optimum Beach Fill Design Cross-Section
Accurate beach profile surveys, wave information, and sediment data taken at Ocean City, Maryland provided an opportunity to evaluate four beach fill design alternatives using the beach...
Complex Principal Component Analysis of Wave-Like Sand Motions
Complex Principal Component Analysis is applied to bathymetric data from the SUPERDUCK experiment at Duck, NC. This approach is shown to describe more of the variation with fewer functions...
Sediment Budget at Oceanside, California, Calculated Using a Calibrated Shoreline Change Model
A quantitative sediment budget analysis was made for the shoreline segment extending from 4 miles north to 4 miles south of Oceanside Harbor using a calibrated shoreline change model....
PITTLEACH: A Numerical Model of Landfill Stabilization
This paper addresses the theoretical development, use and application of PITTLEACH, a computer program conceived to simulate the processes of landfill stabilization. Since the physical,...
An Evaluation of Area Source Dispersion Algorithms
The correct simulation of air pollutant dispersion from area sources of pollutants has presented some unique challenges to dispersion modelers. This study employs geometric tests and sensitivity...
Hydraulic Analysis of the Impacts of I/I on System Capacity
The USEPA Stormwater Management Model was used to evaluate the impact of infiltration and inflow on the separate sewer facilities of one of the largest sewage treatment districts in the...
Propositions for Packed Bed Adsorption Reactor Design
This paper states ten propositions which describe the behavior of 'wave fronts', i.e., adsorbate concentration versus distance profiles at given elapsed times,...
Screening Level Modeling in Support of an Estuarine Toxics Management Program
Mathematical models will be used in the future to determine maximum allowable pollutant loading rates for several toxics to the South San Francisco Bay Estuary. This project consisted...
Preliminary Investigation into Using Oxidation-Reduction Potential (ORP) for Real-Time Control of Aerobic-Anoxic Sludge Digesters
This research explores the use of Oxidation-Reduction Potential (ORP) to control an Aerobic-Anoxic Sludge Digestion Process. It compares a Fixed-Time Control reactor (3 hours of air on/3...
Biological Methods for Air Decontamination: Modeling Hydrocarbon Removal
Bench-scale tests indicate biofilter treatment of gasoline and diesel with activated carbon support media is first order, while removal of ethanol on compost is zero order. Treatment of...
Modeling Emissions from Aerobic Treatment Systems
A mathematical model has been developed specifically for accurately quantifying the dispersion of emissions in the near vicinity of a groundlevel area source. This model accounts for variations...
Assessment of Effects of a Water Supply Withdrawal on Downstream Flows for Anadromous Fish Reproduction
A BASIC computer model was developed to simulate reservoir operations in conjunction with a proposed water supply withdrawal. The model was used to assess the potential impacts of the...
Using Multiple Water Quality Models for Determining Variable Emission Levels for Wasteload Allocation
We present a methodology for determining the least-cost wasteload allocations from multiple point sources discharging into a single water body. The system of point sources is modeled as...
An Analysis of Modeling Techniques in Pollution Management of Natural Water Systems
This paper will focus on various models to demonstrate the difficulties with modeling techniques. The difficulty with developing a valid model for a system is explored through the study...
Information Entropy and Environmental Engineering
Environmental engineering decisions are often made with limited information. In such cases it is useful to express uncertain quantities with a probability distribution. The use of information...
Electronic Computation
This proceedings,
CADD for Export
By using sophisticated structural design software and high-speed PCs, engineers in Pittsburgh overcame myriad problems when designing a highrise industrial tower in India. First, they...
Monte Carlo Simulation Techniques for Predicting Annual Power Production
The problem of the creation of a simulation model utilizing the Monte Carlo method at a single site is addressed. The result of the analysis is a picture of the production at the site...
Evaluating the Dynamic Operating Benefits of Hydro Power Plants
In 1986, the Electric Power Research Institute asked Decision Focus to develop a new planning model to quantify the dynamic operating benefits of power technologies that offer operating...
Techniques for Balancing Instream Flow Needs with Project Operation
Balancing power and non-power benefits of hydroelectric developments has become a controversial issue in the relicensing of projects. Multiple project and multiple objective flow management...
Return to search