Embankment Design and Construction in Cold Regions
This book is a state-of-the-practice report on embankment design and construction in cold regions involving either permafrost or seasonal frost areas. The similarities and differences...

Soil Properties Evaluation from Centrifugal Models and Field Performance
The performance of geotechnical projects is dependent upon the appropriateness of the design theory to the boundary conditions, and the characterization of the soil properties used in...

Effects of Oil Spills on Water Retention in Sandy Soils
This paper concerns the relationships between water and oil saturations in sandy soils. Special attention is given to an environment similar to the groundwater table and the capillary...

Underdrain Tube Wall, Perforation Design and OBPA to Minimize Bio-Chemical Clogging
Bio-chemical clogging of underdrains has been most frequently associated with iron deposits (ochre). The underlying sticking agents have been a variety of bacteria and their exudates commonly...

Adsorption, Desorption and Transport of Pesticides in Groundwater: A Critical Review
Adsorption and desorption are major mechanisms affecting the transport and fate of pesticides in groundwater. Equilibrium, chemical nonequilibrium and physical nonequilibrium adsorption...

Bulk Stomatal Resistance in Operational Estimates of Evapotranspiration
General relationships for estimating canopy or bulk stomatal resistance and aerodynamic resistances of grass and alfalfa reference crops for use in the Penman-J.L. Monteith equation are...

Stable Channels with Loose Boundary
Recently, G. Parker suggested that the lateral transport of downstream momentum due to Reynolds stresses should be included in the momentum balance used to calculate the boundary shear...

Riprap Design by Modified Safety Factor Method
The Safety Factor method for designing riprap is based upon straight forward physics combining rock properties and flow characteristics. M.A. Stevens developed the method by summing the...

Near-Bed Sediment Concentration in Non-Uniform Flows Over Gravel Beds
The calculation of near-bed sediment concentration is formulated in terms of equations governing the dispersion of heavy particles in non-uniform turbulent shear flows over stable gravel...

Analytical and Numerical Modeling at High Sediment Concentrations
Methods for classifying sediment-water mixtures according to material concentration and rheologic properties are discussed. Results from laboratory and field measurements show that bed...

Entrainment of Bed Sediment by Density Underflows
The erosion caused by a density-driven underflow has been studied experimentally. The observations indicate that a strong density current can entrain substantial amounts of bed sediment....

Ultimate Sediment Concentration
The sediment rating curve is used to relate sediment discharge to water discharge, under steady equilibrium flow conditions. The slope of the sediment rating curve is a measure of the...

Effectiveness of Spur Dike Notching
The most widely used technique of ameliorating the environmental effects of river-training works has been to construct notches in spur dikes (or to allow notches to remain in damaged dikes)...

Snow-Melt Triggered Debris Flows Affecting Utah's Megalopolis
During the abnormally wet years of 1983 and 1984, debris flows were triggered late in spring on the west flank of the Wasatch Mountains and elsewhere in Central Utah. These debris flows...

Environmental Degradation of Spawning Gravels in the Tucannon River
The important relationship between upstream soil and water conservation measures and salmonid habitat conditions in the Pacific Northwest is illustrated by way of computer simulations...

Analysis of Onsite Measurements of Scour at Piers
Existing onsite measurements of local scour at bridge piers were assembled and analyzed to obtain an equation that predicts the expected maximum depth of local scour at a bridge pier....

Prediction of Scour Depth Under Armoring Conditions
A simple procedure is proposed to compute scour depth on an alluvial bed having graded materials under flow conditions which produce armor layer at the bed surface. The procedure is based...

The Effects of Sediment Transportation Changes on Aquatic Habitat
Sediments are a natural part of the riverine and estuarine environment. However, if the sediment load changes or bed sediment type occur, direct and sometimes detrimental and sometimes...

Estimation of Uplift Pressure in Cracks in Concrete Gravity Dams
This paper presents an analytical solution to predict uplift pressures in cracks in concrete gravity dams. It is shown that drainage systems are effective in reducing such pressures....

Lunar Resources: What is Known and Expected
The lunar regolith is the source of a number of basic materials which can be utilized in lunar construction. These materials include those which are obtained directly from the regolith...

 

 

 

 

Return to search