Adhesives and Structural Plastics
An overview of some primary considerations for the use of adhesives and their advantages in connection of structural plastics is presented. Effective joint geometries, surface preparations,...
Behavior of Externally Confined Concrete Columns
This paper investigates the feasibility of strengthening of seismically deficient concrete columns with high-strength fiber composite straps. The concrete columns will be externally confined...
The Crown and the Curtain Wall
Crowning the complex curtainwall of an 870 ft concrete tower with a 150 ft high crown of aluminum masts in concentric rings above the 60th floor required ingenuity and extraordinary cooperation...
Seismic Hazards in the Eastern U.S. and the Impact on Transportation Lifelines
In the eastern US seismicity is low, hazard is moderate, and risk is quite high, especially in metropolitan regions with vulnerable transportation systems typically not designed to resist...
Evaluation of Seismic Vulnerability of Highway Bridges in the Eastern United States
For high risk seismic zones such as California, the state-of-the-art in earthquake resistant design for new highway bridges has been well advanced, especially since the damaging 1971 San...
Engineering Pre-engineered Buildings
Pre-engineered buildings have become more sophisticated. There are several manuals and guides on how to engineer the so-called pre-engineered structures, but none are complete. There are...
Empirical Simulation of Future Hurricane Storm Histories as a Tool in Engineering and Economic Analysis
Although the database of past storm occurrences and their detailed histories and geometries at or near a site is essential to planning safe and cost-effective future engineering operations...
Design Loads for Sloshing in TLP Pontoons Tanks
Impact of fluid inside the Auger TLP ballast tanks on tank walls was investigated and changes made to the structural design in an accelerated fashion through the use of model testing....
A Simple Method to Compute Wave Loads on a TLP
In this paper, analytic diffraction (Linton and Evans, 1990) and radiation (Kim, 1992) solutions for arrays of bottom-mounted vertical circular cylinders are used to compute hydrodynamic...
Nonlinear Wave Runup on Large Circular Cylinders
Various design methods for computing nonlinear wave runup on a large-diameter circular cylinder are presented. First, empirical correlations are developed between the observed maximum...
Computer Aided Design for Deep Water Offshore Risers
This paper describes a software package (OTRC-Riser-91) that was developed under the sponsorship of the Offshore Research Technology Center that is funded by the National Science Foundation...
The Mother of All Resilient Structures: Fixed-Base Tower in 3000-Foot Water and Some Outstanding Issues
This paper describes design and development work for 40- to 80-well fixed- base - yet compliant - towers for 2000- to 3000-foot water depths. Technical issues which are covered include:...
Validation of the SEADYN90 Cable Simulation Model Using a Three-Dimensional Cable Deployment Data Set
This paper presents data from a full-scale, three-dimensional cable payout test and the corresponding numerical simulations using the SEADYN90 computer model. The experiment, which was...
Design of Tension Leg Platforms: A Knowledge Based Approach
Tension leg platforms (TLPs) are floating compliant platforms designed for deep water offshore hydrocarbon production. Only a few TLPs have actually been built, but others are currently...
Wave Effects on Offshore Structures?Some Recent Research
The present paper summarizes methods of estimating wave effects on offshore structures, and highlights a selection of recent related research. Initially, certain aspects relating to the...
Re-Qualification of Offshore Platforms
Older platforms that are being re-qualified for extended service involve many technical problems that are unlike those associated with design of new platforms. Procedures to help resolve...
Reliable Design-Wave Force Predictions for Seabed Pipelines
The results of three separate field research projects have been pulled together to provide a design formula for maximum wave-induced horizontal force on a submarine pipe. This broadly-applicable...
The SIMBAT Software Package for Stochastic Interpolation of Ocean Wave Kinematics as an Aid in the Engineering Design of Large Floating Structures
Geostatistical techniques of nonconditional and conditional simulation are used in a new public domain computer software package, named SIMBAT, to stochastically interpolate ocean wave...
Hydraulic Design of Offshore Breakwater in Sergipe, Brazil
A Petrobras (Petroleo Brasileiro S.A.) marine terminal was recently constructed in Sergipe, Brazil (Figure 1). The offshore breakwater was initially designed in a conventional way, but...
Experimental Research on Groyne Stability Under Very Oblique Wave Action
Most of the experimental research concerning the stability of coastal structures is focused on normal wave incidence. However, many of these structures are subject to waves which run predominantly...
Return to search