Carbon Isotopic Data from Test Hole USW UZ-1, Yucca Mountain, Nevada
Rock-CO2-gas analyses in test hole USW UZ-1 at Yucca Mountain indicate that gas movement in the unsaturated zone is likely through a dry-fracture...

The Nagra-DOE Cooperative Project
Tne Nagra-DOE Cooperative (NDC-I) research program was sponsored by the U.S. Department of Energy (DOE) through the Lawrence Berkeley Laboratory (LBL), and the Swiss Nationale Genossenschaft...

Control of Tracers, Fluids, and Materials for the Yucca Mountain Site Characterization Project
This paper describes use and control of tracers, fluids, and materials (TFM) at the Yucca Mountain Site Characterization Project. Management of TFM is necessary to ensure that site characterization...

Using QA Classification to Guide Design and Manage Risk
Raytheon Services Nevada has developed a classification process based on probabilistic risk assessment, using accident/impact scenarios for each system classified. Initial classification...

Hydrogeochemical Site Investigations by Teollisuuden Voima Oy, Finland
Groundwater samples collected from cored boreholes (500-1000 m), borehole wells and multilevel piezometers in crystalline bedrock have been characterized and classified. The reference...

Geohydrologic Data and Models of Rainier Mesa and Their Implications to Yucca Mountain
The geohydrologic data collected at Rainier Mesa provide the only extensive observations in tunnels presently available on flow and transport in tuff units similar to those of a potential...

Review and Selection of Unsaturated Flow Models
The Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M&O) is conducting a thorough review and evaluation of existing flow and transport models....

Utility Oversight of Cask System Development Program
This paper will present the electric utility industry's perspective on the status and scope of the Department of Energy's Office of Civilian Radioactive Waste Management's (DOE/OCR WM)...

Standard Contract Issue Resolution Process: An Overview and Status
The Department of Energy has identified 35 issues associated with the Standard Contract for Disposal of Spent Nuclear Fuel and/or High-Level Waste (10 CFR Part 961) which need to be resolved...

Post-Irradiation Fuel Assembly Dimensions for Transportation and Storage Cask Designs
When designing casks for the shipment of Spent Nuclear Fuel (SNF), one of the most important considerations is the external dimensions of the fuel assemblies to be shipped. Since SNF assemblies...

The DOE Waste Acceptance Process for the Vitrified High-Level Waste Form
Borosilicate glass from Defense HLW producers will be emplaced in the civilian radioactive waste repository. Vitrified HLW will be under production before the repository license application...

Status of Cask Procurement Strategy to Satisfy DOE/OCRWM Requirements
The Nuclear Waste Policy Act requires the development of a safe and efficient system to transport spent nuclear fuel to and within the Federal Waste Management System. This paper describes...

Systems Implications of Repository Thermal Loading
A study was conducted to determine if implementation of a hot, cold or intermediate repository thermal loading strategy would have specific impacts on the overall Civilian Radioactive...

Field Investigation of Mining-Induced Seismicity on Local Geohydrology
Hydraulic response of the rock mass due to earthquakes is one of the concerns in the assessment of the long-term performance of a repository. Studies performed by other researchers indicated...

Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...

Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...

Effects of Core Sealing Methods on the Preservation of Pore Water
Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention...

Full-Field Dye Concentration Measurement Within Saturated/Unsaturated Thin Slabs of Porous Media
This paper presents a full-field dye concentration measurement technique that extends our experimental capabilities to the measurement of transient dye concentration fields within steady...

Determination of Water Content in Unsaturated Flow Experiments Using TDR and Capacitance
Electromagnetic techniques have been used for many years for the determination of moisture content in materials. We are adapting two of these techniques to the estimation of moisture in...

Inference of Moisture Content in Unsaturated Media Using Ultrasonics
This study focuses on the ability of commercial ulltrasonics equipment to determine the moisture content in unsaturated media. We are interested in the possible application of this technology...

 

 

 

 

Return to search