Relation of Channel Stability to Scour at Highway Bridges Over Waterways in Maryland
Data from assessments of channel stability and observed-scour conditions at 876 highway bridges over Maryland waterways were entered into a database. Relations were found to exist among...
Shale Scour at BNRR Yellowstone River Bridge, MT
Both the Burlington Northern Railroad and Montana Department of Transportation bridges across the Yellowstone river just south of Laurel, Montana, are founded on spread footings placed...
Analysis of Local Scour at Bridge Piers
Many studies have been performed on the cause and effects of local scour at bridge piers, and various prediction equations have been generated based on these studies. The general approach...
Optimizing Water Transfers in Urban Water Supply Planning
A number of water supply agencies in the Western United States have begun to integrate water transfers into their overall water supply planning, including the use of transferred water...
The Seattle Forecast Model: A Tool for Water Resources Management in the Seattle Area
The Seattle Forecast Model, SEAFM, developed by Hydrocomp Inc. for the Seattle Water Department, is an interactive, graphic system for streamflow forecasting and reservoir analysis of...
Galveston Bay 3-D Model Study Channel Deepening Circulation and Salinity Results
The effects of deepening the Houston Ship Channel through the Galveston Bay estuary are predicted using the 3-D finite element numerical model RMA10-WES. The primary concern is the effect...
Modeling the Tides of Massachusetts and Cape Cod Bays
A time-dependent, three-dimensional numerical modeling study of the tides of Massachusetts and Cape Code Bays, motivated by construction of a new sewage treatment plant and ocean outfall...
GIS and SWMM Applications in Developing the Lake Houston Watershed Management Program
The City of Houston has undertaken the task of developing a Watershed Management Program for the 2,828 square mile lake Houston Watershed in an effort to prevent future degradation of...
New York Bight Three-Dimensional Water Quality Model
The numerical modeling technology developed for Chesapeake Bay was applied to the Middle Atlantic Bight extending 550 km form Cape May, NJ, northeasterly to Nantucket Island, MA, and extending...
Hydraulic Performance of a Flexible Curtain Used for Selective Withdrawal ? A Physical Model and Prototype Comparison
Reclamation (U.S. Bureau of Reclamation) studied a 1:120 scale undistorted density stratified physical model to develop a lightweight flexible curtain barrier that would control the outflow...
A Flexible Curtain Structure for Control of Vertical Reservoir Mixing Generated by Plunging Inflows
To maintain salmon habitat in the Sacramento River, efforts are being made to pass cold water inflows through Whiskeytown Reservoir, California, with minimal warming. In Whiskeytown, summer...
Sacramento River Environmental Requirements
Environmental requirements have altered bank protection engineering and construction on the Sacramento River, California. Conflicts between public safety and environmental protection remain...
Flow Diversion in a Steep, Coarse-Bed Stream
A case study is presented of the hydraulic design of a diversion structure in a high velocity, coarse bed streamcourse. Mill Creek, a tributary to the Upper Jordan River in the southern...
Influence on Steel Deck on Composite Beam Strength
Results of a recent study were described in which 7 push-out tests and 4 composite beam tests were conducted. The results were consistent with other recent studies reported in the literature,...
Microtunneling: Overview and Case Study
Microtunneling is defined in the United States as a remotely controlled, laser guided pipe jacking process, which does not require personnel entry. This paper describes the components...
Flow Study of In-Service Sanitary Sewers Rehabilitated with Insitupipe
In an effort to define the flow characteristics of sanitary sewer segments rehabilitated with Insituform under normal in-service conditions, Insituform of North America, Inc. (currently...
Concrete Pipe for Sanitary Sewers Corrosion Protection Update
Significant advances have been made in the last decade in the area of sanitary sewer design techniques. Some of the most important advances have been in the prediction and prevention of...
The Ivie Pipeline Delivering Water to West Texas
The Ivie Pipeline is a $76,000,000 - 156-mile long water pipeline being constructed in West Texas. This paper describes highlights of the planning, design, and construction phase....
Evaluation of a Proprietary Tape Coating Alternative for the 157 Mile Ivie Pipeline
A two part evaluation of alternative protective coating systems for the 157 mile Ivie pipeline was made. In Part I, an evaluation was made on the suitability of a proprietary tape coating...
Relocating a 54-Inch Diameter Force Main without Interrupting Wastewater Flow
The City of Tampa, Florida, was faced with the challenge of relocating three segments of an old 1372 mm (54-in.) diameter reinforced concrete pipe force main, totaling nearly a mile in...
Return to search