Sea Defence System at Herne Bay, England
This paper reviews the investigations carried out into the design of the proposed now sea defences fronting the central area of Herne Bay on the North kent coast. The existing defences...
Short Beach Nourishment Fill Performance on an Irregular Coatline
A review of the beach nourishment fill performance literature reveals that the accepted and proven theories of beach fill performance can be categorized as either one-line models or analytic...
Monitoring of the 1988 Boca Raton Beach Nourishment Project
During July and August of 1988, approximately 843,000 cm of sand was placed along a 2.3-km stretch of beach in Boca Raton, Florida. Post-cosntruction monitoring of the beach nourishment...
Mitigation of Harbor Caused Shore Erosion with Beach Nourishment Delayed Mitigation, St. Joseph Harbor, MI
St. Joseph Harbor MI. was the first Corps of Engineers Section 111 erosion-mitigation project to be built. Between 1 Jun 76 and 5 Aug 85, about 1,067,000 cy of fine sand was placed in...
Gravel Equilibrium Beach Design for Arresting Shore Erosion at Flathead Lake, Montana
Erosion of the north shore of Flathead Lake, Montana, is caused by summer wind waves generated along a 22-mile fetch. The preferred method for arresting erosion there is a beach composed...
An Overview of Segmented Offshore/Headland Breakwater Projects Constructed by the Buffalo District
Since 1977 the Buffalo District has constructed three segmented offshore breakwater projects and currently has one under construction. In addition, the District has recently completed...
Field Monitoring of a Modular Detached Breakwater System
A pair of modular concrete detached breakwaters was installed at a site on the New Jersey shore. This paper describes an eighteen month field monitoring program of the beach response to...
Bay Ridge, Anne Arundel County, Maryland Offshore Breakwater and Beach Fill Design
Construction of the Bay Ridge shoreline protection project was completed in July 1991 and consists of eleven offshore segmented breakwaters with beach fill. The breakwaters, located about...
Chesapeake Bay Field Modeling and Monitoring Projects
'Traditional' erosion control measures often do not meet the corps of Engineers' requirement for economic justification. The costs of these measures are much greater than the benefits...
Application of a Beach Plan Evolution Model in Sergipe, Brazil
An offshore breakwater 543 m long located at about 2.4 km from the shore at 10 m of water depth (above chart datums) provides protection to a liquid bulk terminal (Terminal Portuarlo de...
Design of Protective Dunes at Dam Neck, Virginia
Dunes act as a primary coastal defense against inundation in the Netherlands and the Dutch Government has devoted considerable effort towards development of reliable procedures for the...
Articulating Block Mat Revetment for Whaler's Village
The desire of homeowners to live along the California coastline presents the engineer with many unique design opportunities and constraints. Housing built atop coastal cliffs and bluffs...
Coastal Processes and Engineering on a Micronesian Fringing Reef
In 1980, portions of the fringing reef flat protecting the village of Tafunsak, Federated States of Micronesia, were dredged to provide fill material for an airport runway access road....
Observation of the Post-Construction Performance of a System of Groins along an Eroding Beach
A system of six groins was constructed along an eroding coast of reversing sediment transport. This paper describes the performance of the groin system in terms of the evolution of the...
Laupahoehoe Harbor Planning, Design, & Construction
Laupahoehoe Harbor provides access to the fertile fishing grounds along the northeast or Hamakua coast of the island of Hawaii, Hawaii. The planning, design, and construction of Laupahoehoe...
Harbour Development in Southern Part of Thailand
Fishery ports located along the river mouthes in southern part of Thailand were developed by improving their navigation channel to provide acessibility of fishery boats to travel all year....
Inner Harbor Wave Conditions due to Breakwater Overtopping
The results of this study have important application to the design of small boat marinas protected from incident waves by breakwaters that may be overtopped during extreme wave events....
Wave Barriers: An Environmentally Benign Alternative
This paper describes the history and development of the environmental wave barrier and the current planning and design being undertaken for a major expansion of the small boat harbor at...
Design, Construction, and Performance of a Baffled Breakwater
The Spud Point Marina breakwater is located within Bodega Harbor, a protected embayment on the northern California coast. Waves are attenuated by baffle panels hung between support piles....
An Engineering Assessment of Hydrodynamics and Beach Response at Little River Inlet, NC-SC
The Waterways Experiment Station's (WES) Coastal Engineering Research Center (CERC) conducted an analysis for the U.S. Army Engineer District, Charleston (SAC) of the monitoring data collected...
Return to search