Columbus Clear Wells
At an average of 8 million gal. each, six new clear wells at the Hap Cremean Water Plant in Columbus, Ohio represent the largest post-tensioned, reinforced concrete noncircular tanks ever...

Guidelines for Evaluating Aging Penstocks
Guidelines for Evaluating Aging Penstocks is intended to provide a useful guide to information and engineering techniques for evaluating aging...

Lessons From Kobe
On Jan. 17, Kobe, Japan became the first post-World War II, heavily populated, industrialized area to bear the full brunt of a high-magnitude earthquake. Engineers hope the resulting destruction...

Northridge Postscript: Lesson on Steel Connections
Immediately after the Northridge earthquake in January 1994, the general concensus was that steel-framed buildings performed extremely well. Later, inspectors were surprised to find weld...

In the Wet
The concept of using large diameter vertical cylinder piles of steel and concrete is not new. Vertical cylinders constructed in pneumatic caissons go back at least 70 years. Steel cylinders...

NDE for Steel Bridges
Nondestructive evaluation (NDE) is the only way to detect fatigue cracks hidden by the paint on steel bridges, and FHWA-sponsored research into the problem has been given highest priority....

Composite Sketch
Composite materials from the aerospace and military sectors are showing promise in highway, bridge and transportation applications. Some of the current and potential applications of composites...

Not Your Father's Concrete
A simple mixture of water, aggregate and cement, conventional concrete is environmentally-friendly by nature. But with landfills bloating and hazardous wastes becoming increasingly difficult...

San Francisco CSO
Today, even a light rain can overload San Francisco's combined sewer overflow (CSO) system, sending untreated sewage and stormwater into the bay and ocean. This is especially...

Shotcrete for Underground Support VII
This proceedings consists of papers presented at the Shotcrete for Underground Support VII Conference held in Telfs, Austria, June 11-15, 1995. It covers three broad themes concerning...

Engineering a Landslide
A slope failure in northwest Alabama has been stabilized using a system of grouted INSERT piles to provide load transfer across the failure surface of the slide. This system, referred...

Advances in Underground Pipeline Engineering II
The first international conference on Advances in Underground Pipeline Engineering was held in 1985. Some 50 authors and over 300 delegates from 20 countries took part in the presentations...

Designing for Drama
Near the Passaic River in Newark, N.J., not far from the famous Iron Bound restaurant district and Newark's Penn Station, construction crews swarm around the steel skeleton...

New Construction Materials Proliferate in Japan
Research and development of new construction materials is extensive in Japan, and many new materials are being used in Japan now. The author analyzes the research environment in Japan,...

More Parking Above
Vertical expansion of six (6) new floors of parking garage on top of four (4) floors of existing structure that was built over three decades ago, adding 155,000 square foot of new structure....

Rock Steady
Heavily damaged during the Loma Prieta earthquake, Oakland City Hall had to be repaired and retrofitted. Now Oakland boasts the tallest seismically isolated building in the world. The...

Reliability and Response Control of R/C Buildings
A damage model is summarized for the assessment of seismic damage of reinforced concrete structures. The model is to evaluate specific buildings that were damaged in Mexico City during...

Checking Concrete Growth
When the Tennessee Valley Authority built its dams in the 1930s, instrumentation installed in the massive concrete detected a defect that would later cause major problems: concrete growth...

Real-Time Control for a Robotic Rebar Bender
Job conditions and variability in the properties of the stock material combine in a rebar bending operation to create a challenging environment for a robotic bender. This paper reports...

Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...

 

 

 

 

Return to search