Disposal of Defense Spent Fuel and HLW from the Idaho Chemical Processing Plant
Acidic high-level radioactive waste (HLW) resulting from fuel reprocessing at the Idaho Chemical Processing Plant (ICPP) for the U. S. Department of Energy (DOE) has been solidified to...
Simulated Hanford Waste: A Study of Physical Properties, Gas Retention, and Gas Generation
This study helps to establish the physical and chemical processes responsible for the generation and retention of gases within high-level waste contained in Tank 101-SY on the Hanford...
Evaluation of Neutron Emission from Vitrified HLW Compositions
Neutron radiological hazards from vitrified HLW are important for handling and transportation - especially if the concept of separate storage of concentrated transuranics is adopted, as...
Use of Coupled Geochemical and Transport Calculations for Nuclear Waste Problems
The dissolution and migration of radionuclides from a final repository for radioactive waste is complex chemically. The dissolution and release rates depend on the chemistry and on advective...
Surface Complexation Model Prediction of Np and Pu Distribution Coefficients
Robust estimates of radionuclide sorption coefficients (Kd) are needed to estimate radionuclide retardation during ground-water transport from a...
??4U/??8U as a Ground-Water Tracer, SW Nevada-SE California
The 234U/238U ratio of uranium in oxidizing ground waters is potentially an excellent ground-water tracer...
Crisis Management Training at Nuclear Facilities: Simulations in Bomb Threats
Substantial enhancements to the study of the theoretical and applied foundations of crisis management have been achieved in recent years. Whereas risk managers study 'the probability that...
Development of the Office of Civilian Radioactive Waste Management's Self-Assessment Program
This paper describes the development and implementation of the Self-Assessment (SA) Program of the Office of Civilian Radioactive Waste Management (RW). The basis for RW's SA program is...
Evaluation of Borosilicate Glass as a High-Level Radioactive Waste Form
The choice of a borosilicate glass as a high-level nuclear waste form is evaluated base on observations of natural and artifical glass hydration and reaction, experimental results of glass...
The Effect of Gamma Irradiation on the Volatility and Redox State of Simulated DWPF High-Level Nuclear Waste Glasses
Gamma-induced volatility of simulated DWPF high-level nuclear waste glasses is highly dependent upon the redox state of the glass. For oxidized glasses with an Fe2+/(Fe2+...
Hanford Ferrocyanide Reactivity: Effects of Other Tank Constituents
In this study simulated wastes were used to determine the effect of potential waste constituents on the reactivity and explosivity of Hanford ferrocyanide-bearing wastes. Test results...
Lead Isotopic Composition of Paleozoic and Late Proterozoic Marine Carbonate Rocks in the Vicinity of Yucca Mountain, Nevada
Paleozoic and Late Proterozoic marine carbonate rocks (limestones, dolomites, and their metamorphic equivalents) cropping out in the vicinity of Yucca Mountain contain lead with an isotopic...
Ecological Risk Assessment of Proposed Deep Geologic Disposal of High-Level Nuclear Waste in Canada
Using population dynamic models of moose and brook trout, and assuming topographic, hydrographic and other habitat features typical of the Canadian Shield in Ontario, we have estimated...
Mercury Porosimetry Studies on a Natural Fracture
Mercury porosimetry techniques were used to study the effects of stress on the capillary pressure characteristics of a single natural fracture. In addition, permeability measurements were...
Managing Government Contracts: Tips to Keeping Your Sanity
The key to managing large government projects is to divide it into smaller manageable pieces and organize it accordingly. Government projects are unique in that they require much more...
Managing AutoCAD and Intergraph MicroStation Systems
The reality today is that Computer Aided Design information is being transferred from one CAD system to another. More often, sharing CAD information among the design team requires multiple...
Recommendations for the Design of CAD User Interfaces
The user interface of a CAD system appears to the users to be the system itself. Thus its design is very important. For this reason the committee 4.2.1 'Computer Aided Design' of the Gesellschaft...
A Work Packaging Process Model for Petrochemical Plant Piping Construction
This paper presents a model for the current work packaging process for petrochemical plant piping construction. The basic foundation of the model is formed by identifying major decision...
Construction Information Management
Use and characteristic of Information Systems in the organizations has been changed significantly. These systems are not functionally oriented any more and they do not have any bias toward...
Pre-Design Planning with Intelligent Project Development Brochure (IPDB) System
The functional design criteria and other technical requirements are to be established during the pre-design planning stage of a project. At this pre-design stage, the formulation of the...
Return to search