Chicago Automates Expressway Lanes
Chicago motorists will soon reclaim another rebuilt expressway in October with substantial completion of a $450 million, 7.5 mi portion of I90/94, the John F. Kennedy Expressway. The two...
Stiffness of Low Rise Reinforced Concrete Shear Walls
This report,
Improving Development Characteristics of Reinforcing Bars
Prepared by the Civil Engineering Research Foundation. Sponsored by CERF, This report describes the development and implications of a new concrete...
Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Executive Report)
Prepared by the Civil Engineering Research Foundation. This executive report presents a high-level, policy-oriented summary of the High-Performance...
Materials for Tomorrow's Infrastructure
A Ten Year Plan for Deploying High Performance Construction Materials and Systems (Technical Report)
Prepared by the Civil Engineering Research Foundation. This report presents a detailed program to transform our nation's infrastructure....
Questioning Composites
Steel, concrete and timber are, of course, the most commonly used construction materials. Composites, or fiber reinforced plastics, have been used in specialty applications in construction...
The French Composite: A Bridge for Normandy
Aside from its record breaking 856 m span, the most important fact about France's 2,141 m Pont de Normandie�the Normandy Bridge�is that it is being built at all. The bridge...
Design and Uses of Reinforced Shotcrete in Underground Projects in Canada
The first use of steel fibre reinforced shotcrete (SFRS) in Canada was using the wet-mix process in the support of deteriorated ground in 80 year old railway tunnels in the Fraser Canyon,...
High-Grade Concrete for the Single Permanent Shotcrete Lining Method
With the single permanent shotcrete lining method in underground construction in rock, a shotcrete layer placed subsequently to the application of the supporting shotcrete replaces the...
Technical Note: STC-40 Shotcrete Adhesion In Situ Tester
It is essential that the shotcrete when reinforcing the rock mass achieves a good adhesive bond to the rock surface. The strength of that bond can be controlled by pull out testing either...
Development of Mechanized Wet Mix Shotcrete Application in Norwegian Tunnelling Industry
From 1971 to 1980 wet mix shotcrete won the Norwegian market 100%. In the same period hand held spraying was replaced by hydraulic manipulators. From 1980 to 1986, steel fibre use increased...
Guidelines for Shotcreting and Current Development in the Wet-Mix Technique in Finland
Guidelines for shotcreting were written based on the literature survey and shotcreting trials. During shotcreting trials existing Norwegian and Middle-European wet-mix shotcreting concepts...
New Developments in Tunnel Lining by Help of Steel Fibre Reinforced Concrete
The combination of single shell structures in tunnelling with the use of steel-fibre-reinforced concrete is decisively able to reduce the costs of tunnel projects. Several variants of...
An Identity Chart for Steel Fibers
Improvements in ductility and toughness by adding steel fibers to the shotcrete mix are sufficient to enable steel fibers to be used as replacement for steel mesh reinforcements. Steel...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Use of Steel-Fiber Reinforced Wet-Mix Shotcrete in Extreme Rock-Bursting Conditions
If the stresses close to tunnels or caverns exceed the capacity of the surrounding rock, rock-bursting might start. When tunneling in such rock conditions the need for a safe, quick and...
Steel Fiber Reinforced Shotcrete?For Rock Support and Fire Protection
Rapid development in concrete technology and development of equipment has led to a change from dry hand-operated to wet robot shotcreting in Norway. Shotcrete of more than 100 MPa cube...
Use of Long, Variable Length Steel Fibres in Shotcrete
Steel wires are cut to fibres in a shotcrete nozzle and directly incorporated in the ejected shotcrete. Long and variable length fibres can be used. The fibre material is better utilized...
Steel Fibre Reinforced Wet Shotcrete with Very High Deformation Capacity
Tests have been carried out under site conditions in Norway where the performance of 40 mm long DRAMIX fibres was compared with normally used 30 mm fibres. The fibres were mixed into the...
Various Techniques for Fiber Reinforcement
Placing wire netting in thin shotcrete layers was found to be a difficult, dangerous and time-wasting method. Searching for other ways to reinforce the concrete, it has been found that...
Return to search