Advancing Under London
Bored tunnels account for more than 20 percent of the Channel Tunnel Rail Link, the high-speed rail line that will connect the Channel Tunnel with London upon its completion in 2007. In...
Wind Load Provisions
This chapter discusses the different procedures for evaluating design wind loads for buildings....
Examples
In this chapter, twelve examples illustrate how wind loads are determined using the simplified and analytical procedures described in ASCE 7-02. These examples provide guidance to the...
Winged Victory
Located on the western shore of Lake Michigan, the $100 million, 142,050 sq ft (13,100 m�) addition to the Milwaukee Art Museum is the creation of architect, artist, and engineer Santiago...
Advances in Buoy Technology for Wind/Wave Data Collection and Analysis
Considerable advances have been made recently to reduce the cost of gathering meteorological and oceanographic data from coastal waters, especially for meteorological and oceanographic...
Investigation of Flood Protection from Alluvial Fan Flows and Minimizing Impacts to a Sensitive Habitat Preserve: Whitewater River Basin, Coachella Valley, California
The study describes and evaluates (1) the baseline conditions to hydrology, hydraulics, wind transport of sand, sediment transport by fluvial process, the environment, economics, and (2)...
A Grand New Bridge
Approximately 65 km south of Seoul, rising above the Asan Bay, the Seohae Grand Bridge now stands as the longest bridge in South Korea. The 9.4 km long cable-stayed bridge, which runs...
Turning with the Wind
A 125-m high tower built at the site of the Glasgow Science Center in the United Kingdom required some innovative design methods. To reduce the aerodynamic effects imposed on the slender...
Dynamic Response of Lattice Towers and Guyed Masts
Prepared by the Task Committee on the Dynamic Response of Lattice Towers of the Technical Committee on Special Structures and the Technical Administrative Committee on Metals of the Structural...
Wind Load Provisions
This chapter explores the provisions of the Wind Load standard....
Examples
This chapter contains ten examples of determination of wind loads using the analytical procedure of the ASCE 7-98 standard....
Traffic-Calming Basics
The use of traffic calming measures, such as speed humps, traffic circles, and lane narrowings, is becoming more popular in the United States as a way to reduce vehicle speed and traffic...
Above Them All
The design for what would be the next world's tallest building relies on a 1,550 ft (472 m) high concrete core that will give occupants of the top floors of the building unimpeded...
Application of Water Column Dampers to Control Motions of the Wall Centre, Vancouver
The Wall Centre, a 450 foot tall high-rise tower currently under construction in downtown Vancouver will be the highest building to be constructed in that city. Wind tunnel testing indicated...
Control of Wind Response of the Trump World Tower
The Trump World Tower is a luxury residential building located on 1st Ave. and 48th St. in New York City,...
Design of Structure and Damping System to Control Motions of the Park Tower, Chicago
Park Tower, a 67 story condominium/hotel project currently under construction on the Magnificent Mile, Chicago, IL, will be the first building in North America in recent times that utilizes...
Into the Tunnel
Technological advances in wind tunnel testing and computer-aided design programs are enabling engineers to create taller and more aesthetically interesting buildings than ever before....
Towers in Motion (available in Structural Engineering Special Section only)
Undersea towers are typically designed to rigidly resist the forces of water and wind. But one type of tower is designed to be flexible and, rather than rely on its platform strength to...
Smart Sign Support
The Route 80-MAGIC (Metropolitan Area Guidance, Information and Control) project is considered to be the showcase Intelligent Transportation System (ITS) project for the state of New Jersey....
Cap of Concrete
The roof of a new $84 million arena in New Orleans was built using techniques usually seen in tied-arch concrete bridges. The concrete components of the roof carry the large compression...
Return to search