Application of the Newton Method in Valve Discharge Coefficient Relationships
This paper presents a methodology that utilizes the Newton Method to compute the dimensionless valve discharge coefficient Cd from a manufacturers valve discharge coefficient Cv. The implicit...
Predicting Transport of Organics through Soil Columns using Distributed Mass-Transfer Rates
A numerical model to describe contaminant transport through soil columns, including distributed mass-transfer, is developed. Both a gamma distribution and a lognormal distribution are...
Degradation of Carboxydiphenyl Ether via Bioaugmentation
Two diphenyl ether-degrading bacteria,
Small Inocula Can Effect
This is the first report of colonization of soil by small numbers of a genetically engineered microorganism. The study suggests that the addition of small inocula of D5 to contaminated...
Maryland SHA's Procedure for Assessing Existing Bridges for Scour Vulnerability and for Rating Unknown Foundations
The Maryland State Highway Administration developed a recommended screening procedure for rating existing bridges for Item 113, Scour Critical Bridges, in the National Bridge Inventory...
Selection of Sediment Transport Relations Part III: Numerical Ranking of Sediment Transport Relations
The emphasis of this paper is the methodology for the selection of sediment transport relations and is applicable for analysis of any sediment transport relation. However, to illustrate...
Developing a Rating Table for the Central Diversion Dam Radial Gates
The Central Nebraska Public Power and Irrigation District uses radial gates for flow control throughout its system. The rating tables for five radial gates on a diversion dam are in error,...
Discharge Characteristics of Overshot Gates
Overshot gates are becoming increasingly popular for controlling water levels in open channels because of the ability of the gates to handle flow surges with limited depth changes. While...
The Effects of Water Surface Profiles on Manning's Roughness Coefficient
The Manning Equation has wide application in engineering practice. Nonetheless, certain aspects of it are still not widely understood. Often, engineers deduce the value of Manning's...
Designing Concrete Culverts to Resist Scour Damage
Concrete culverts have been used for over 100 years. In this period, the main design concern centered on structural and hydraulic adequacy of the culvert. Scour is a relatively recent...
The Northridge Fractures: Are We Learning the Right Lessons?
After the Northridge earthquake in January 1994, engineers found problems with special moment-resisting frames. There were multiple facture modes, and typical damage involved primary crack...
Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...
Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Late Stage Damage in G30-500/PMR-15 Laminates
Damage progression has been studied experimentally under tension using [02/906]s...
Convergence Rates of the Method of Successive Elastic Solutions in Thermoplastic Problems of a Layered Concentric Cylinder
This paper examines convergence rates of the method of successive elastic solutions, proposed by Mendelson, in determining the thermoplastic response of an arbitrarily layered concentric...
Implementation of a Viscoplastic, Kinematic Hardening Constitutive Model for Impact Prediction
This paper reports on a preliminary study to determine the significance of the Bauschinger effect on modeling impact and other large deformation events. Such events have significant implications...
Lunar Oxygen Production in a Hydrogen Cold Plasma
This paper examines the concept of oxygen production from unbeneficiated lunar regolith using a non-equilibrium or 'cold' hydrogen plasma. An experimental investigation has indicated that...
Physical Model Tests of Dolos Impact Stresses
An on-going experimental study to determine impact stresses and static nesting stresses in instrumented large scale model dolosse is described in this paper. Seven dolosse were instrumented...
Load Rate Effects on Concrete Compressive Strength
Plain concrete cylindrical specimens from six different concrete mixes, 51 mm in length and diameter, were tested in compression quasi-statically at strain rates between 10-6/sec...
Overweight Trucks and Safety of Bridges
Most states face increasing pressure to issue more and heavier overweight truck permits. Current permit checking methods of many states adopt the AASHTO rating concept with or without...
Return to search