What Is Hydraulic Engineering?
This paper, written to mark ASCE's 150th anniversary, traces the role of hydraulic engineering from early or mid-twentieth-century to the beginning of the twenty-first century....

History of Hot Mix Asphalt Mixture Design in the United States
Asphalt has been used as a construction material from the earliest days of civilization, but though it has long been used as a waterproofing material in shipbuilding and hydraulics, its...

Mathematical Modeling of Watershed Hydrology
Mathematical modeling of watershed hydrology is employed to address a wide spectrum of environmental and water resources problems. A historical perspective of hydrologic modeling is provided,...

Impact of Chemically-Induced Clay Transport and Deposition on the Hydraulic Conductivity of a Natural Sand
The purpose of this paper is to understand in part the dynamic impact of surfactants on hydraulic conductivity for designing enhanced pump and treat operations. This paper has two aims:...

Bayesian Approach to Support Design of a Groundwater Long Term Monitoring Plan
This paper discusses a retrospective data assimilation approach that allows one to examine the spatial and temporal differences between forecast and observed states. Their stability, or...

Island in the Mur
Floating atop an immense pontoon like a shimmering seashell, this elliptical island of steel and glass in the middle of an Austrian river�an inventive, unconventional bridge�was designed...

A Culvert for Abram Creek
To enable Cleveland's airport to expand, a mile-long section of stream located within a deep, steep ravine needed to be buried. The resulting culvert required a design that...

Lifting Collars and Lifting Equipment
The terms lifting collars and shear heads are used interchangeably in the industry. In this book the term lifting collar is used since it is a unique term applicable to lift-slab construction...

Changing Channels
When the strict design parameters of a correctional facility in remote Pennsylvania meant blocking a headwater stream, a team of environmental engineers rerouted the waterway 400 ft (122...

Larger Foraminifers as Contributors to Carbonate Beach Sands
Larger foraminifers are locally significant contributors to tropical carbonate sediments, particularly in the Indo-Pacific region. The two major factors influencing foraminiferal production...

Geotechnical Aspects of Beach Restoration
Large-scale beach restoration undertaken by the U.S. Army Corps of Engineers in Florida requires millions of cubic yards of beach quality sand. Exploration for these sand resources starts...

Uses and Limitations of Conventional Hydraulic Models in the Planning and Design of Storage Tunnels
The hydraulic design of storage tunnels requires special considerations relative to the design of conventional sewers. These issues include characterization and control of inflows, energy...

An Aggressive I/I Abatement Program is Underway as Part of Vallejos Wet Weather Program
The Vallejo Sanitation and Flood Control District (VSFCD) is undertaking an aggressive pilot program to control wet weather flows and eliminate sanitary sewer overflows (SSOs) that are...

The Watershed Modeling System
The Watershed Modeling System (WMS) is a comprehensive environment for hydrologic analysis developed by the Environmental Modeling Research Laboratory (EMRL) at Brigham Young University...

Streambank Stabilization and Revegetation Workshops - IECA
Abstract only, no paper....

Using Tracer Response Curves to Quantify Hydraulic and Channel Complexity of Prairie Creek, Northwestern California: Implications for Over Wintering Habitat for Juvenile Coho Salmon
This study measured and compared aspects of channel structural complexity with hydraulic complexity at a range of flows including winter storm flows. Five 200-meter reaches containing...

Investigation of Flood Protection from Alluvial Fan Flows and Minimizing Impacts to a Sensitive Habitat Preserve: Whitewater River Basin, Coachella Valley, California
The study describes and evaluates (1) the baseline conditions to hydrology, hydraulics, wind transport of sand, sediment transport by fluvial process, the environment, economics, and (2)...

A GIS Model for Assessing the Impact of Increased Channel Discharges on Hydraulic Geometry
A GIS model is being developed that can be used to assess the impact of increased channel discharges on the hydraulic geometry of streams in the Powder River (structural) Basin in northeast...

Water In, Water Out
Moving water into and out of the Eastside Reservoir, which will be the largest body of freshwater in southern California, requires some of the largest pumping and water conveyance systems...

Sealing Springfield
The city of Springfield, Missouri, initiated a $12-million, 12-year infiltration and inflow elimination program for its sanitary sewer system after a federal lawsuit was filed to seek...

 

 

 

 

Return to search