Performance and Analysis of Frames With URM Infills
The interaction of unreinforced hollow concrete block masonry (URM) infill walls and gravity load designed (GLD) frames has been studied at Cornell University. The primary goal of this...
Behaviour of Concrete Masonry Infill - Steel Frame Structures
Twenty-eight masonry shear panels infilled in steel frames were tested to ultimate strength under in-plane, horizontal loading applied at roof level. The parameters investigated in this...
Lateral Response of Unreinforced Masonry Infill Frame Panels
This paper presents the results of the out-of-plane testing phase of the National Science Foundation Grant BCS 9102347. This project addresses the out-of-plane response to lateral loading...
Experimental Evaluation and Finite Element Analysis of Masonry-Infilled R/C Frames
Eleven tests were conducted on 1/2-scale, single-story infilled frame specimens to study the influence of the relative strengths of the infill panels and the bounding frames and the frame...
Building Code Requirements for Masonry Structures (ACI 530-92/ ASCE 5-92/TMS 402-92); Specifications for Masonry Structures (ACI 530.1-92/ ASCE 6-92/TMS 602-92); Commentary on Building Code Requirements for Masonry Structures (ACI 530-92/ ASCE 5-92/TMS 402-92); Commentary on Specifications for Masonry Structures (ACI 530.1-92/ ASCE 6-92/TMS 602-92)
Copublished with American Concrete Institute (ACI) and The Masonry Society (TMS)
Specifications for Masonry Structures (ACI 530.1-92/ ASCE 6-92/TMS 602-92)
Specifications for Masonry Structures (ACE 530.1-92/ASCE 6-92/TMS 602-92) is a joint effort of the American Concrete Institute, the American Society of Civil Engineers, and The Masonry...
Masonry Carries the Load
Engineers frequently have preconceived notions about building materials. Masonry, for example, is commonly selected by architects for its color and texture, rather than by engineers for...
Code Provisions for Unreinforced Masonry Bearing Wall Buildings in California
Prior to the Long Beach earthquake of 1933, unreinforced masonry (URM) construction was usual in California, as it still is in many areas of the United States. The poor performance of...
CenterCore Strengthening System for Seismic Hazard Reduction of Unreinforced Masonry Bearing Wall Buildings
The CenterCore technique of reinforcing unreinforced masonry walls was developed with the help of a National Science Foundation grant in 1984. The CenterCore strengthening system consists...
Seismic Retrofit of Building Structures with Unreinforced Masonry Infill Walls
The paper summarizes the result of an analytical study conducted by the authors concerning the evaluation of the seismic performance of buildings with unreinforced masonry infills. The...
Earthquake Strengthening of a Twelve Story Non-Ductile Concrete Frame Building with Unreinforced Masonry Using Displacement Control Criterion
The structural concern with the Cooper Arms Apartment building when subjected to ground shaking was the in-plane and out-of-plane forces on the infill and consequences of the infill resisting...
Report and Summary of ATC-31?Evaluation of the Performance of Seismically Retrofitted Buildings
Structural and damage data for seismically retrofitted buildings affected by the October 1, 1987 Whittier Narrows and October 17, 1989 Loma Prieta, California earthquakes were collected...
Diagnosing Lateral Strength of Existing Concrete or Masonry Buildings
A research prospectus is presented for improving present methods of structural evaluation for concrete and masonry buildings. Specifically, the proposed research plan is limited to strength...
A Shear Transfer Model for Floor-To-Wall Connections in Concrete Masonry Structures
Based upon experiments conducted at the Univ of California, San Diego (UCSD) on floor-to-wall connections in concrete masonry structures, a constitutive model was developed for the overall...
Analysis of Masonry Walls with Smeared and Discrete Crack Models
To design modern reinforced masonry structures for seismic loads and to evaluate the seismic safety of existing unreinforced masonry buildings, the shear resistance of masonry shear walls...
Three-Dimensional Analysis Model for Complete Masonry Buildings
For the predictive and diagnostic analysis of the complete nonlinear response of masonry buildings to seismic load input, a 3-D finite element model is under development at UCSD. The model,...
New Views for Modeling Dynamic Response of URM Buildings
Various computational models are used to depict seismic response of an unreinforced masonry building that was subjected to the 1989 Loma Prieta Earthquake. The worthiness of various analytical...
In-Situ Determination of the Compressive Stress-Strain Relationship of Multi-Wythe Brick Masonry
In-situ stress-strain relationships of existing multi-wythe brick masonry have been determined by introducing flatjacks into sawcuts made in the exterior wythe of the multi-wythe masonry....
Full-Scale Testing of Unreinforced Masonry Infill Frame Panels
This paper presents the results of the out-of-plane testing phase of the National Science Foundation Grant BCS 9102347. This phase of the program addresses the out-of-plane response to...
Out-of-plane and In-plane Testing of URM Infills
This paper summarizes the out-of-plane followed by in-plane quasi-static testing of two, full-scale Unreinforced Masonry (URM) Hollow Clay Tile (HCT) infills. The testing is part of a...
Return to search