Application of a Geographic Information System to Estuarine Hydrodynamic Modeling
A geographic information system has been used in a hydrodynamic study of Albemarle Sound, North Carolina, to provide an efficient means for spatial data organization, information display,...
Turbulence and Reynolds Stress Distribution in a Natural River
Turbulence characteristics of ambient flow velocities and their comparison with those generated by the movement of barge traffic within the channel border area in a navigation waterway...
Uncertainty Quantification in Water Distribution Parameter Estimation
Calibration for water distribution system model parameters is usually undertaken with a minimal amount of field measurements so additional pseudomeasurements are assumed. Both the actual...
Daily Drought Monitoring by the Use of Existing Hydrologic Records
To manage water efficiently in case of drought, an effective drought monitoring method has been of interest. Drought durations and their conditional probabilities are estimated by applying...
Drought-related West Tennessee Channel Bank Failures
Massive bank failures occurred in 1988 along a 14-kilometer reach of the lower Obion River channel in Dyer County, West Tennessee where the river flows through an abandoned Mississippi...
Fluvial Recharge of Sand Mining Pit
Accuracy in modeling fluvial processes becomes increasingly important as development occurs along waterways. The FLUVIAL-12 (1, 2) model is used to simulate the recharge of sand mining...
Construction Product Performance, The Unexpected
Efforts made in the construction, industry to increase the quality of the constructed facility through the development of new materials and systems and through the reduction of labor intensive...
Computer Assisted Design and Construction
This paper presents a comprehensive package for conducting structural analysis, design, and project management on microcomputers. Several examples are presented to illustrate the usefulness...
Smart Exception Reporting
Project control systems that contain a degree of 'intelligence' are possible with today's technologies. At the same time project controls engineers...
Kinematics and Trajectory Planning for Robotic Excavation
One of the high volume and repetitive construction operations at the construction site is the excavation of soil. Automation of the excavation work requires a robotic system that is able...
A Gas Chromatographic Protocol for the Measurement of Krypton Gas in Water
This paper presents the results of a study to investigate the feasibility of using a gas chromatographic (GC) technique for the measurement of non-radioactive krypton gas concentrations...
Characteristics of Low-Slope Streams that Affect O2 Transfer Rates
Multiple-regression techniques were used to derive the reaeration coefficients estimating equation for low sloped streams: K2 = 3.83 MBAS-0.41...
A Simple Empirical Model of Aeration at Navigation Dams
In a study of aeration at 28 dams in the upper Ohio River basin, site-specific least-squares linear regression models were used to describe the dissolved oxygen deficit below each dam...
Instrumentation for SASW Testing
The Spectral-Analysis-of-Surface-Waves (SASW) method is presented. Various test setups and corresponding data reduction procedures are discussed. Several instrumentation systems have been...
Accuracy and Resolution of Surface Wave Inversion
Shear wave velocity profiles of soils and pavements may be evaluated nondestructively using surface wave tests such as the Spectral Analysis of Surface Waves (SASW) method. In these tests,...
In-Situ Calibration of USGS Piezometer Installations
Among the few potentially liquefiable sites around the world that have been permanently instrumented with pore-pressure transducers and accelerometers, only the Wildlife Site in the Imperial...
Electronic Data Acquisition and Analysis for Soil Dynamics Applications
Recent advances in micro-computer-based data acquisition hardware and software systems have created a window of opportunity for the soil dynamics specialist. Increases in the number of...
Flawed Assumptions: Why Bridge Deck Joints Fail
Engineers should continually examine, evaluate and improve their representations of reality to avoid basing their beliefs, decisions, practices and policies on flawed assumptions. Such...
Mechanics Computing in 1990's and Beyond
This proceedings,
Earthquake Considerations in Design of the Los Angeles Metro
This paper discusses the earthquake design of the Los Angeles Metro. The design earthquake parameters are presented and discussed in light of the behavior of buried structures subjected...
Return to search