Santa Barbara Harbor Assessment of Shoaling Frequency
The City of Santa Barbara is addressing the recurring problem of shoaling of its harbor entrance channel. The City relies on income generated from harbor businesses that in turn require...
Use of Portable Simulator in Designing Channel Improvements for Port of Brownsville, Texas
The Port of Brownsville, located at the southernmost tip of Texas, serves as an import/export port for both southern Texas and northern Mexico. The proposed channel improvement project...
Naval Pier Foundation Design and Construction, Pearl Harbor, Hawaii
The paper presents a case study of foundation design and construction for a pier in Pearl Harbor. The study covers a review of site investigations, laboratory testing, pile selection and...
Subaqueous Disposal Area Development and Mitigation
Development of subaqueous dikes on soft soils extensively utilized geosynthetics. The design adopted a wide-bermed embankment with high-strength geotextile for tensile reinforcement and...
Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...
Application of a Dolos Structural Design Procedure
Dolos concrete armor units are widely used to protect coastal structures. New developments in armor unit strength design permit the armor unit designer to optimize the dolos parameters...
A Design Manual for Coastal Fluidization Systems
This paper summarizes a recently completed design manual on fluidization systems to manage sand in the coastal environment for sand bypassing at inlets and harbor mouths and for creating...
Coastal Engineering Design Codes in the Netherlands
Dutch research strategy on water defences and the resulting coastal and hydraulic engineering design codes (technical documents) are briefly overviewed. Special attention is paid to organizational...
Seismically Safe, Spectator-Friendly
As 50,000 frightened spectators at Candlestick Park can attest, the Loma Prieta earthquake in 1989 provided chilling evidence of the importance of seismic design in public structures....
Peaches and Concrete
One Peachtree Center, Atlanta's latest highrise tower, will measure 62 stories high (860 ft) with 1.42 million sq ft of office space when completed next July. It will also...
Study of Three Dimensional Crack Tip Location of Mortar by Acoustic Emission
Plain mortar specimens were tested under three-point bending. Experimental variables include the width of the specimen and the notch-to-depth ratio. The experimental results of 12 specimens...
Concrete Beam Testing with Optical Fiber Sensors
The use of an embedded multimode optical fiber to monitor curing and load-to-failure testing of a reinforced concrete beam has been investigated. The embedding process used to network...
Nondestructive and Destructive Testing of a Three Span Skewed R. C. Slab Bridge
A three span, skewed, reinforced concrete slab bridge was field tested to destruction by the authors. Before the actual destructive test, nondestructive tests were performed to determine...
Landfills: Anatomy of Automated Design
California's 360 acre Bee Canyon landfill (completed last year) sits amid a complicated network of narrow canyons with side slopes 300 ft high. As with most landfill projects,...
On the Influence of Seismically Induced Residual Forces on Bridge Abutment Design
The seismic design of bridge abutments depend on the anticipated movement of the abutment during the design earthquake. For seat-type abutments in which the backfill resistance can be...
Analytical Studies on the Seismic Response of Lead Rubber Base Isolated Bridges
Highlights of a study related to the response of base isolated bridges are presented. Four different analytical models are developed and used to evaluate the response of base isolated...
Damage Dependent Micromechanics in Metal Matrix Composites
A computational approach is used herein to model the effects of processing induced thermal residual stresses on radial, hoop, and shear stresses at the fiber/matrix interface in a continuous...
Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam Under Impact Loading
The compressive-stress strain response of polyurethane foam under uniaxial compressive impact loading has been studied. The development of a uniaxial constitutive model from strain rate...
On the Diffusional Stress Transmission
A probabilistic diffusional mechanism for the propagation of intergranular forces has been formulated as a set of three mathematical assumptions. The equilibrium equations are complemented...
Comparative Evaluation of Plasticity Theories Against Tension-Torsion Test at Finite Strain
This paper investigates and evaluates three hardening theories against a variety of nonproportional loading experiments on tubes made of annealed copper. It was concluded that the isotropic...
Return to search