Modeling Nitrogen Movement Through Loess Soils
This study evaluates the ability of the Root Zone Water Quality Model (RZWQM) to track the movement and fate of nitrate (NO3--N)...

Two-Dimensional Analysis of Furrow Infiltration
A general applicable two-dimensional unsaturated-saturated model for transient soil-water flow conditions in heteogeneous soils was developed. The water flow model was applied to simulate...

Heavy Metal Transport in the Columbia River, British Columbia
Data on the total forms of selected metals were used to assess their concentrations at two sampling sites on the Canadian Columbia River from 1984 to 1989. Cadmium, the response variable...

Sensitivity Analysis of a Ground-Water-Flow Model
A sensitivity analysis was performed on 18 hydrological factors affecting steady-state groundwater flow in the Upper Floridan aquifer near Albany, southwestern Georgia. Computations were...

An Overview of EPRI Hydrogeochemical Code FASTCHEMTM
The capabilities of the flow and transport modules that make up FASTCHEM are described. The linkages among the various modules that are required to achieve a hydrogeochemical analysis...

Measurement and Analysis of Hydraulic Conductivity Variability of a Heterogeneous Aquifer
The spatial variability of hydraulic conductivity of a shallow alluvial aquifer was investigated using borehole flowmeter measurements. The study was conducted at the site of a large-scale...

Slug Test: Double-Porosity, Linear Boundary, and Variable Storage Effects
The intention of this paper is to focus on three aspects of the slug test that are not as familiar as the main analysis techniques: the effects of double-porosity formations, the effects...

Prematurely Terminated Slug Tests?A Field Application
Slug tests suffer problems of non-uniqueness to a greater extent than other well tests. Alternatively, a prematurely terminated slug test (PTST) or a systematized drillstem test is proposed,...

A Preliminary Evaluation of Model Uncertainty Given Parameter Sensitivity for Select Transport Codes
The ever-increasing use of mathematical models in groundwater management has raised concerns as to uncertainties associated with their abilities to simulate real-world pollution problems....

Groundwater Modeling with GIS: An Example
The versatility and widespread usage of a geographic information system (GIS) as a hydrological modeling tool is only now showing up in the literature. In this regard, a research team...

Evaluation of Embankment Erosion at TVA's Chickamauga Project
Studies were made to evaluate the extent of erosion to be expected under probable maximum flood (PMF) conditions. The erosion studies were made using the EMBANK computer program. The results...

Hydraulic Features of Flexible Curtains Used for Selective Withdrawal
Flexible curtain barriers are being investigated as a way to modify power penstock intakes to achieve selective withdrawal. The curtain barrier controls the elevation from which water...

Bridge Scour Vulnerability Assessment
Although the failure of the New York Throughway bridge over Schoharie Creek in 1987 has focused national attention on scour related failures, other failures reinforce the need for implementing...

A National Bridge Scour Data Collection Program
A study to collect and analyze field measurements of bridge scour is being conducted by the U.S. Geological Survey in cooperation with the Federal Highway Administration. The primary objective...

The Role of Computational Fluid Dynamics in Hydroturbine Analysis
Prospects of developing comprehensive methods of computational fluid dynamics for the analysis and design of new generation of hydroturbines are considered. Unique requirements for this...

Dam Break Analysis for a Series of Dams Using the HEC-1 and DAMBRK Computer Programs
The HEC-1 and DAMBRK computer programs were developed by the US Army Corps of Engineers, Hydrologic Engineering Center (HEC) [3] and by the National Weather Service (NWS) [4], respectively....

Preliminary Recommendations from the Task Committee on Standards in Hydraulics
The Task Committee on Standards in Hydraulics has been given the responsibility of recommending whether or not the American Society of Civil Engineers (ASCE) should formulate standards...

Redondo Beach Thermal Study
Thermal tests were conducted in a 3D physical model of Redondo Beach King Harbor to simulate power plant cooling water intake and discharge into the harbor. Tests were conducted to determine...

Design of a Stratified Cooling Channel
Cooling ponds are used for managing waste heat discharges. Cooling ponds are, however, expensive to construct and operate. A cooling channel is studied as an alternative means of managing...

A Microcomputer-Based System for Two-Dimensional Flow Modeling
An integrated, microcomputer-based system has been developed for simulation of two-dimensional, unsteady, free surface flows. The system consists of a finite-element mesh generation code,...

 

 

 

 

Return to search