Tracer Gas Transfer Technique for Shallow Bays
Developmental field tests using propane and Rhodamine WT tracers were conducted to adapt the tracer gas method for use in shallow bays. A special injection box was built to prevent mixing...
Gas Transfer Measurements on an Ice-Covered River
Wasteload allocation for existing and proposed pulp mills in the Athabasca River Basin of northern Alberta, Canada, necessitated measurement of the atmospheric reaeration rate, K2,...
Field Tests on a Bubbleless Membrane Aerator
A novel bubbleless hollow fiber membrane aerator has been developed and tested for the oxygenation of water. In this process pure oxygen is maintained on the inside of a bundle of sealed,...
Symposium on Ground Water
This proceedings,
Quake-Safe Housing, Again
Because so little data exist about earthquake behavior of buildings that have been strengthened to meet seismic codes, many engineers are curious about the Hotel Oakland in California...
The Soil-Rock Boundary: What is it and Where is it?
A major issue in many areas of Civil Engineering practice is the boundary between earth materials that are defined as soil and those that are defined as rock. Designers, contractors, and...
Where Does Rock Begin Beneath Philadelphia?
Philadelphia provides an excellent example of the engineering problems associated with the interpretation of saprolite/weathered rock/sound rock profiles. The bedrock beneath the city...
Special Bedrock Conditions in Greater Boston
The Cambridge Argillite, a weakly metamorphosed shale, forms the major portion of the Boston Basin, a structural as well as topographic depression. In the greater Boston area, the argillite...
Ground Stabilization in Shallow Depth Soft Ground Tunneling
A new approach was employed for ground stabilization to drive a semi-circular cross-section tunnel with overall dimensions of 24 ft (7.3m) wide, 12 ft (3.7m) high, and 164 ft (50.0m) long....
Instrumentation for SASW Testing
The Spectral-Analysis-of-Surface-Waves (SASW) method is presented. Various test setups and corresponding data reduction procedures are discussed. Several instrumentation systems have been...
Recent Advances in Cone Penetrometer Measurements (Software and Hardware) and Its Application to Liquefaction Susceptibility
Some of the recent advances made in Cone Penetration Test (CPT) data acquisition system and real time processing of CPT data are presented. A key component of the new CPT data acquisition...
In-Situ Calibration of USGS Piezometer Installations
Among the few potentially liquefiable sites around the world that have been permanently instrumented with pore-pressure transducers and accelerometers, only the Wildlife Site in the Imperial...
Electronic Data Acquisition and Analysis for Soil Dynamics Applications
Recent advances in micro-computer-based data acquisition hardware and software systems have created a window of opportunity for the soil dynamics specialist. Increases in the number of...
Use of Bender Elements in Soil Dynamics Experiments
Transducers employing piezoelectric bender elements have been found to be versatile sources and receivers of small-amplitude shear waves, with multiple potential applications. The constitutive...
Use of Piezoceramic Bender Elements in Soil Dynamics Testing
The use of piezoceramic bender elements is described to measure small strain, shear wave velocity distributions in soil models used in centrifuge and shake table testing. Experimental...
Plastic Highway Bridges
For highway bridges, composites are most effective in cables and decks. Researchers have developed and tested cables and deck sections for strength and fatigue resistance. Link-type cables...
Recent Advances in Seismic Design and Retrofit of California Bridges
This paper describes the damage and lessons learned from the most recent major earthquakes, the resulting bridge seismic design and detailing changes and the seismic retrofit program implemented...
Seismic Design and Performance of Railroad Bridges
Damage to railroad bridges during earthquakes in the United States and Japan is summarized. Research tasks are outlined to develop seismic design and retrofit criteria for railroad bridges....
Seismic Design for Port of Los Angeles, 2020 Program
Due to the Port of Los Angeles' (POLA) importance as a regional hub for transportation and commerce and the potential for a major seismic event in the Southern California...
Seismic Practices for the Air Transportation System: Evolution and Needs
The seismic performance of air transportation systems is reviewed. The evolution of seismic design criteria and practices for major air transportation system elements is discussed. The...
Return to search