Installation of Thermistor Strings in Test Borings: A Comparison of Methods and Results
Several test borings were instrumented with two thermistor strings, one inside and one outside an air-filled PVC casing to compare readings of both thermistor strings and the stability...
Testing of Admixtures for Seabed Strengthening
Samples from several offshore soil borings in an area of the Beaufort Sea were subjected to laboratory testing to determine the applicability of this method. The soils were mixed with...
Reinforced Roads Bridging Voids
A mathematical model was developed to design a pavement section reinforced with a geotextile or related product to span a void. A full scale field test was conducted to verify the model....
Ice Cover Research?Present State and Future Needs
Presentation reviews, at first, a number of problem areas in ice engineering, such as the determination of vertical and horizontal forces floating ice covers exert on fixed structures,...
Geomembrane Liner Performance in the Arctic
A geomembrane liner must be selected not only on the basis of its chemical compatibility with the substance to be contained, but also on the basis of its physical performance characteristics...
Wave Forces on an Arctic Monotower Platform
At offshore lease sites located along the western coast of Alaska, longer periods of open water can be expected. As a result, wave induced hydrodynamic loading will become a more significant...
Bearing Capacity Calculations for Piles in Permafrost
Small-scale model piles frozen in various soils were tested at constant rates of displacement and constant load. The derived values were used to calculate the maximum allowable stress...
Sheet Pile Interlock Behavior: A Moving Contract Problem
The finite element method is used to analyze the behavior of sheet pile interlocks subjected to an uniaxial pull test. The thumb and finger of the interlock provide three contact points...
Finite Element Discretization for Mixed-Mode Fracture Problems
The finite element discretization of mixed-mode problems in fracture mechanics is investigated. The characteristics of the mesh near the crack affect the accuracy of the finite element...
Analysis of R/C Slab Under Turbine Missile Impact
Turbine missile impact on reinforced concrete barrier in nuclear reactor power plants is simulated using the finite element method. One of four full scale turbine missile impact tests...
Measuring Dynamic Occupant Loads by Microcomputer
Present building codes regard live loads caused by human movement as deterministic; values are based upon experience and tests run in 1912, 1922, and 1932. An experimental project to statistically...
Performance of Highway Traffic Barriers
This paper describes an investigation of traffic barrier performance in New York State. A one-year sample of all traffic-barrier accidents in the state was obtained from Department of...
Strengthening Alaskan Beaufort Sea Soils with Portland Cement
Preliminary studies undertaken to assess the feasibility of utilizing gravity structures on soft arctic silts indicate that the available foundation capacity are insufficient. Therefore...
What to Do When a Failure Occurs
When a major building problem involving structural failure occurs, action should begin immediately to determine the damage or failure and detect the underlying problem. This paper will...
Sampling and Testing in Stiff Crustal Clays
In desiccated clays, the secondary structure consisting of fissures and slickensides greatly influence the measurement of soil strength. In a sampling study, such soils were found to be...
Mechanics of Crack Propagation in Stiff Clays
Many stiff clays forming part of natural slopes and earth dams exist in the fissured state. When these cracks are subjected to gravity induced normal and shear stresses they may propagate....
A Laboratory Investigation of the Undrained Small Strain Behavior of London Clay
Three different total stress-paths were followed during shearing of the anisotropic consolidated (CAU) tests: compression, extension and a stress-path simulating an element under a plate...
Lateral Pressure in a Stiff Clay
A series of consolidated undrained and drained triaxial tests and oedometer tests were performed on horizontal and vertical specimens taken from an overconsolidated cretaceous clay. An...
Excavation in Hard Clays of the Keuper Formation
For the construction of a lock on the Main-Danube-Canal in South Germany a 30 m deep cut had to be excavated in the overconsolidated clays and claystones of the Keuper formation. The strength...
Preliminary Seismic Risk Maps for Puget Sound
Ground shaking during Puget Sound earthquakes is characterized by irregularly shaped areas of high intensity ground motion, not all of which are correlated with soil type. Simulation of...
Return to search