ASCE will be sunsetting the Civil Engineering Database (CEDB) in the coming months. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Geotechnical Properties and Landfill Disposal of FGD Sludge
Extensive test data from more than a decade of research are compiled on the geotechnical engineering properties of flue gas desulfurization (FGD) sludges with emphasis on double alkali...

Quality Assurance Monitoring of a Large Clay Liner
The Keele Valley Landfill at Maple, Ontario, consists of a 99 ha (245 acre) facility to serve the Metropolitan Toronto area. The landfill is located in a former sand and gravel pit, with...

Shallow Ocean Disposal of Contaminated Dredge Material
The contaminated dredged materials from harbors and waterways along heavily populated coastal areas such as Connecticut must often be disposed at shallow ocean sites. To isolate the contaminants...

Hydrocarbon Refining Waste Stabilization for Landfills
Mobile pollutants are generated in a landfill as a function of the waste properties and the response of the deposit to the in-situ stress, climate and biochemical conditions. Release of...

The Typical Engineering Properties of Fly Ash
Knowledge of key physical and engineering properties of coal fly ash is needed in the planning, design, and construction of both disposal and utilization projects. While considerable data...

Evaluation of Waste Disposal Sites Using Geotox
GEOTOX is a knowledge-based expert system designed to assist in the identification and classification of waste disposal sites. Existing methodologies such as formal or qualitative risk...

Embankment Over Fly Ash Pond at Portsmouth Power Station
The fly ash and bottom ash sediments from the Portsmouth Power Station in Portsmouth, Virginia were being sluiced into a 39 acre diked ash pond near the plant. The plant was about to convert...

Thickened Slurry Disposal Method for Process Tailings
Common practice in the disposal of process tailings consists of impounding the wastes as thin slurries or suspensions in diked containment areas. Such a procedure poses problems relating...

Water Treatment Plant Sludge as Landfill Liner
Chemical sludge is produced in large quantities during the water treatment processes. The present regulations pertaining to the disposal of solid wastes impose many constraints on any...

Conversion of a Reservoir Into a Landfill Site
The Writer is acting as a geotechnical consultant during the conversion of a disused water reservoir into a landfill site for domestic and industrial refuse. The site developer had no...

Bentonite Matting in Composite Lining Systems
The 1984 Hazardous and Solid Waste Amendments to RCRA mandated that double lining systems utilizing synthetic membrane liners be required for hazardous waste landfills. Recognizing the...

Stabilization of FGC Wastes
Presently, flue gas cleaning (FGC) wastes (scrubber sludges and flyash) are produced in large quantities, with future production likely to increase as utilities install additional stack...

Environmental Monitoring and Observations Before and During Excavation of a Landfill in Owatonna, Minnesota
A Minnesota landfill inactive since 1962 was excavated in 1985 to prepare the site for construction of a new waste water treatment plant. The excavation refuse was disposed of in nearby...

Modelling of Contaminant Transport in Clays Via Irreversible Thermodynamics
This study develops a model for the analysis and prediction of contaminant transport in soils using principles of irreversible thermodynamics. The developed model includes five parameters...

Timber Bulkheads
Timber bulkhead design and construction methods are presented in this publication for consideration by the engineering profession. Included are papers on an analytical method for the design...

Soil Improvement
A Ten Year Update
Since the publication of Soil Improvement?History, Capabilities and Outlook after the Annual ASCE convention in Philadelphia in 1976, a dramatic growth in certain soil improvement techniques...

Structural Engineering and Microcomputers
This publication contains five papers on the use of microcomputers by structural engineers. The first paper discusses the design of multi-story rigid steel frames. The design process employed...

Seismic Analysis of Safety-Related Nuclear Structures and Commentary on Standard for Seismic Analysis of Safety Related Nuclear Structures
This standard provides requirements for performing analyses to obtain design information which will lead to the reliability of structures under a severe earthquake. The goal of this standard...

Effects of Damage and Redundancy on Structural Performance
There are numerous factors involved in the interrelationship between damage states, redundancy, system strength and structural performance. This volume examines some of these factors and...

Use of Vibration Measurements in Structural Evaluation
Over the past decade the capabilities for vibration measurements and analysis have advanced significantly. It is now a routine procedure to be able to measure natural frequencies of structures...

 

 

 

 

Return to search