The Analysis of Repository-Heat-Driven Hydrothermal Flow at Yucca Mountain
To safely and permanently store high-level nuclear waste, the potential Yucca Mountain repository site must mitigate the release and transport of radionuclides for tens of thousands of...
The Results of Near-Field Thermal and Mechanical Calculations of Thermal Loading Schemes
Two waste emplacement schemes, borehole and in-drift, are under evaluation as potential repository drift geometries for the Yucca Mountain Site Characterization Project. Calculations were...
Systems Implications of Repository Thermal Loading
A study was conducted to determine if implementation of a hot, cold or intermediate repository thermal loading strategy would have specific impacts on the overall Civilian Radioactive...
Spent Fuel Assembly Source Term Sensitivity Parameters: SAND92-2113C TTC-1225
Containment of cask contents by a transport cask in a function of the cask body, one or more closure lids, and various bolting, hardware, and seals associated with the cavity closure and...
Code Requirement for Concrete Repository and Processing Facilities
Because of varied uses and performance/safety requirements of concrete for high, medium and low level radioactive wastes, a review of the current ACI 349 Code document was carried out...
Critical Stresses in Nuclear Waste Container Under Normal Handling Conditions
Critical stresses in the pintle, flat tophead, canister shell, the bottom plate and in the weldment of a high level nuclear waste canister are evaluated under a variety of static and dynamic...
Influence of Deterministic Geologic Trends on Spatial Variability of Hydrologic Properties in Volcanic Tuff
Hydrologic properties have been measured on outcrop samples taken from a detailed, two-dimensional grid covering a 1.4 km outcrop exposure of the 10-m thick nonwelded-to-welded, shardy...
Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...
Rock Mass Mechanical Property Estimation Strategy for the Yucca Mountain Site Characterization Project
Rock mass mechanical properties are required in the design of repository drifts and ramps to assess the impact of thermal loads from the heat-generating wastes on excavation performance...
Development of 3-D Lithostratigraphic and Confidence Models at Yucca Mountain, Nevada
Computerized three-dimensional geologic models of potential high-level nuclear waste repositories such as Yucca Moutain, Nevada, are important for visualizing the complex interplay of...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Effects of Core Sealing Methods on the Preservation of Pore Water
Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention...
Instrumentation Requirements for the ESF Thermomechanical Experiments
In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures...
Single-Hole in Situ Thermal Probe for Hydrothermal Characterization at Yucca Mountain
The REKA thermal probe method, which uses a single borehole to measure in situ rock thermophysical properties and provides for efficient and low-cost site characterization, is analyzed...
A Formal Communication Process: Pathway to Improved Policy Making
This paper will examine the efforts made and the steps taken by the U.S. Department of Energy's Office of Civilian Radioactive Waste Management (DOE/OCRWM) to establish and keep open lines...
Two-Way Communication: A Case Study in Improving Public Interactions
Successful public interaction requires several key elements. They include: a non-intimidating forum for exchanging information, two-way communication, advance preparation to identify what...
Using an Engaging Approach to Products to Help Create Long-Term Credibility
A long-term, thorough and engaging public information products plan is essential for supporting interaction between Nevadans and the scientists and staff on the U.S. Department of Energy...
Yucca Mountain Student Tours: Response, Reactions, and Results
In March of 1991, the Yucca Mountain Site Characterization Project (YMP) began providing monthly tours for the general public to visit the Yucca Mountain site. The goal of these tours...
Earthquakes and Nuclear Waste: A Lesson in Media Relations
The Little Skull Mountain earthquake on June 29, 1992 marked the beginning of a challenging period for the U.S. Department of Energy's (DOE's) Yucca Mountain Site Characterization Project's...
Cultivating Public Involvement: Going Beyond the Nuclear Waste Policy Act
Congress, recognizing that States, Indian tribes, and local governments have a unique and vested interest in the siting of high-level radioactive waste facilities, gave these parties special...
Return to search