Australian Coal Terminal Operates Happily Beside Residential Area
A coal terminal was built in Port Kembla, Australia at a $7.56 cost per metric ton. The port was built for $121 million, $18 million below estimate. It included such innovations as the...
Structural Analysis of Light-Frame Subassemblies
Conventional light-frame subassemblies have a long history of good performance. Until recently this performance could not be quantified adequately because of the complex ways in which...
Micro-Computer Program: Roof Purlin Design
A micro-computer program is explained in step-by-step manner as a shortcut for biaxial bending design with results in as little as 60 seconds. Biaxial bending requires the consideration...
World's Largest Installation of Fabric-Formed Pile Jackets
One major feature of fabric forming is permeability. One application of this technique is protective encasement of steel H and pipe piles at a major pier in Chile. The Huachipato Pier...
Engineer's Notebook: One-step Formula for R/C Tension Steel
In the design of reinforced concrete beams, after loadings and materials are defined, the first step is to assume a beam depth. Then the required steel area and beam width are determined....
U.S. Response to Coal Demand: Port and Harbor Improvements
The OPEC oil embargo, which caused long gasoline lines in 1973, caused incredibly long lines of coal ships along the East coast just last year. These ships came to bet coal to fuel overseas...
Fiber-Reinforced Concrete Proves Worth for Airport Pavements
Laboratory and field tests indicate that fiber-reinforced concrete has higher flexural and tensile strength, higher impact resistance, and improved resistance to spalling and joint deterioration...
Emerging High Performance Structural Plastic Technology
Structural plastics have forced their growth by better performance over conventional materials in hostile environments. Demand by industry for increased life of process equipment and structures...
Microcomputers: Do They Have a Place in Large Engineering Firms?
During the past few years, microcomputers have really begun to take hold in small consulting engineering firms. Less well known is the fact that microcomputers are also beginning to take...
State-of-the-Art Report on Finite Element Analysis of Reinforced Concrete
This comprehensive state-of-the-art report contains a summary of the special features of finite element analysis applied to reinforced concrete, including: constitutive relationships,...
Collapse of the Kansas City Hyatt Regency Walkways
A summary of the National Bureau of Standards report on the collapse of the Kansas City Hyatt Regency walkways is presented. The report does not assign blame to any party; rather, it explains...
Classic Papers in Hydraulics
Fourteen papers representing basic contributions which made possible rapid advances in analytical techniques in hydraulic engineering are presented. The papers reflect state-of-the-art-...
Engineers Notebook: Checking Capacities of Eccentrically Loaded Columns on an Existing Bridge
This article focuses on the structural analysis of eccentrically loaded columns. A simple and novel graphical technique for determining the load-carrying capacity of the columns is presented....
Evaluation, Maintenance and Upgrading of Wood Structures
Prepared by the Subcommittee on Evaluation, Maintenance, and Upgrading of Timber Structures of the Committee on Wood of the Structural Division of ASCE. ...
The Structural Fuse: An Inelastic Approach to Earthquake-Resistant Design of Buildings
An alternative to the empirical approach to earthquake-resistant design of buildings is proposed and illustrated with a design example. Instead of strengthening every member to resist...
A Home for the Navy's Trident Subs
On 7,000 acres near Seattle, Washington, sits the largest military base constructed in the U.S. since World War II. The Navy's multimillion-dollar Trident project, a combination...
A Probability-Based Load Criterion for Structural Design
Load factors and load combinations are explored which are compatible with the loads in the proposed 1981 revision of American National Standard A58 (Minimum Design Loads for Buildings...
Dallas College Features Load-Bearing Brick Cavity Walls
A unique concept in masonry design and construction was developed for the Brookhaven College campus in Dallas, Texas. Centering on the use of prefabricated reinforced brick panels and...
Long Span Roof Structures
The papers included in these proceedings treat a wide range of technical topics related to long span roof structures including new structural concepts, structural stability, the effects...
Drilled Piers and Caissons
Drilled piers, also called drilled caissons, drilled shafts, bored piles, and cast-in-situ piles, have recently undergone a period of growth in their use as foundation bearing elements,...
Return to search