Sodium Concrete Reaction ? Structural Considerations
An overview of the sodium concrete reaction phenomenon, with emphasis on structural considerations, is presented. Available test results for limestone, basalt, and magnetite concrete with...
Capability of LMFBR Plant Structures Beyond the Design Base
A study is presented concerning the capability of structures in a loop type Liquid Metal Fast Breeder Reactor Plant, the Clinch River Breeder Reactor Plant (CRBRP), to sustain conditions...
As-Built Locations Through Precision Photography
This paper describes a new application of close range photogrammetry as a technique for obtaining reliable as-built locations of embedded threaded inserts in concrete structures and the...
Design of Thin Wall Reinforced Concrete Pipe Using Dimension Ratio (DR)
Dimension Ratio is defined as the ratio of the internal pipe diameter to the pipe wall thickness. The Caltrans culvert research leading to the development and use of the Dimension Ratio...
Computer-Automated Limit-States-Design of Steel Frameworks
The paper concerns the computer-automated synthesis of minimum-weight planar steel frameworks. For any number of applied loading cases, the design of the structure may be constrained by...
Compression Load Tests on Concrete Piles in Alluvium
A series of tests was accomplished during the design phase for the West Seattle Freeway Bridge Replacement project. The results of instrumented compression load tests in alluvial deposits...
Lateral Load Tests of Piles in Sloping Rock Fill
A new container wharf constructed at the Port of Los Angeles features vertical prestressed concrete piles to provide both vertical and lateral support. A rockfill embankment used to allow...
Pile Foundation Design Using Pile Driving Analyzer
A case history of pile foundation design and construction for Pacific Bell's San Ramon Valley Administrative Complex is presented. Dynamic monitoring of driven piles with...
Role of a Standard in the Production of Drilled Shafts
The preparation of drawings and documents that describe the details of the installation of drilled shafts for a project requires an up-to-date standard. The role of the standard in the...
Geotechnical Perspective?Proposed Drilled Shaft Standard
In the writer's understanding, a standard is an agreed upon manual of practice and as such, sets the level of performance and attainment considered adequate. A standard is...
A Structural Engineering Perspective for Drilled Shafts
This commentary is an attempt to close the gap between the Building Code Requirements for Reinforced Concrete (ACE 318-83) and the design of drilled shafts. The context of design includes...
Advanced Graphical CAD System for 3D Steel Frames
An innovative, advanced graphical computer-aided design system, called STEEL-3D, is described. The main objective of this program is to provide the engineer with all the tools necessary...
Computer Aided Design of Reinforced Concrete
An interactive computer-aided design (CAD) program for the design of reinforced concrete members is herein described. The program, called ECPRS, designs reinforcement and performs all...
Influence of Connection Behavior on Steel Frame Designs at Factored Loads
This paper illustrates how interactive computer graphics, when interfaced with nonlinear inelastic frame analysis programs, can provide a powerful tool for design of semi-rigid frames...
Pavement Recycling: Stopgap or Remedy?
Recycled pavements cost less than new asphalt concrete overlays, but no long term data has ratified how recycled pavements' strength and durability compare to virgin material....
RCC Dam Incorporates Innovative Hydraulic Features
An overview of the features of Monksville Dam is presented, with emphasis on the hydraulic components of the project. This 150-foot (45-meter) high roller compacted concrete structure...
Willow Creek Dam--To Be or Not To Be
In Heppner, Oregon, several alternatives for flood control were considered. A concrete gravity dam constructed using roller compaction methods was selected because of the greatly reduced...
Pipeline Materials and Design
The proper use of pipeline materials and design is obviously paramount in the private and public works sectors. The introduction and proper use of new piping materials and design procedures...
Computer Aided Design in Civil Engineering
Increased application of computer aided design and drafting encouraged the organization of the symposium from which this book was derived. The papers presented at the symposium and included...
High Tech Is More Than a Look
Hollow steel section, also known as tubular steel, is being used for its clean dramatic look, its structural efficiency in compression, the economic efficiency of combining structure and...
Return to search