Simple Methods for Design of Steel Gusset Plates
This paper presents two simple methods for design of steel gusset plates. In the first method, the wedge theories are applied to establish state of stress in steel gusset plates. In the...
Optimum Design of Tapered Tubular Members
An algorithm for designing a tubular structural member with constant taper is presented. The design criterion is that the maximum absolute stress produced by a set of loading conditions...
End Plate Moment Connections for Cyclic Loads
Three pilot tests of full size end plate moment connections under cyclic loading are discussed. In one of the specimens, the premature fracture of one of the inner bolts suggests the possibility...
Hysteresis Studies Including Post Buckling of Angle Web-Members for Truss-Type Girders
The paper presents analytical studies of the buckling capacities and hysteresis behavior of angle-web members of truss-type girders. The eccentricity between the loading point and the...
Tripping and Strength of Asymmetrical Plate Stiffeners
Tripping (lateral-torsional buckling) of symmetrical or asymmetrical plate stiffeners can be analyzed by using differential equations or energy formulation. An analytical study is reported...
Aestetics of Bridges Constructed by Dopravni Stavby, Olomouc, Czechoslovakia
A survey of bridge concepts built in recent years by the State Enterprise Dopravni Stavby, Olomouc that ranks among the largest building trade firms in Czechoslovakia. This firm chooses...
Optimization of Cable Prestresses of Cable Stayed Bridges Based on Minimum Strain Energy Criterion
In this study, an attempt is made to determine the optimum cable prestresses based on the strain energy criterion. The validity of the strain energy criterion on the optimum cable prestresses...
Modeling of Plate and Shell Structures with
Finite element models for the analysis of plates and shells, based on the concept of hp-extension are presented. A methodology for the control and analysis of the error of the finite element...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
Fatigue and Fracture Evaluation of Riveted Bridge Members
Among the major concerns of bridge engineers today are the fatigue damages that have been accumulated in riveted members and the safety of riveted structures. Many of these structures...
Fatigue Strength of Corroded Rolled Beams
Highway and railway bridges fabricated from ASTM A7, A36, and A572 steels will corrode if the paint system is allowed to fail for lack of maintenance. Corroding members lose cross section...
A Method of Computing Impact and Fatigue Life in the Railway Steel Girder Bridge
The purpose of this paper is to investigate the dynamic interactions between an steel girder bridge and a moving freight train. A non-linear, 100-ton, freight car vehicle model and a 70-ft...
Fatigue Evaluation of a Riveted Railroad Bridge
An 83 year old railroad bridge was analyzed for fatigue based on historical records such as the original schedules. Based on the number of cycles to date, corresponding to an effective...
The Fatigue Performance of Welded Joints in a Marine Environment
The fatigue lives of plate-plate, pipe-plate, and tubular welded joints tested in seawater under free corrosion, optimum cathodic protection and cathodic overprotection measured in the...
Application of Fiber-Composites in Civil Engineering
Two potential applications of Glass-Fiber-Reinforced-Plastics (GFRP) in civil engineering type structures are investigated: (1) GFRP rebars in concrete beams; (2) strengthening of concrete...
Aerodynamic Improvements for Plate-Girder Bridges
This paper describes the application of wind tunnel tests on plate-girder cable-stayed bridges to ensure that the cross-section will not be susceptible to wind-induced oscillations. Information...
Concrete Bridges � State-of-the-Art
The paper reviews the types of concrete bridge decks in most common use today, with particular emphasis on recent developments. Current trends in substructures and foundations are also...
Equilibrium-Serviceability Design of Hyperstatic P. C. Beams
A practical flexural design procedure for continuous prestressed concrete girders based on simulataneously ensuring specified margins of safety against both limit states of section and...
Behavior of Externally Prestressed Concrete Girders
A new technique for prestressing concrete girders is presented. The girders are externally prestressed by epoxy-bonding fiber-composite plates to the tension flange of the cambered girders....
Aerodynamic Stability of Long Span Suspension Bridge?Effects of Stiffening Truss Width
This paper presents the effects of truss width upon the aerodynamic stability of the long span suspension bridge with truss girder up to 2000 m. It was found that the truss width had a...
Return to search