Punching Shear of Reinforced Concrete Shell Structures
In reinforced concrete shells punching shear failure may take place, if heavy concentrated loads are applied. Such failure is undesirable, since it does not provide adequate warning and...
Elasto-Plastic Buckling Design for Shallow Cylindrical Shells under External Pressure
Pressures providing elastic-plastic buckling conditions for thin shallow cylindrical shell panels are presented. Classical simple support boundary conditions have been adopted for the...
Fast Monte Carlo Simulations and Safety Index Checking
This paper presents recent techniques which require a small number of simulations to assess the structural reliability. They combine both the concept of importance zones in the random...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Determining Optimal Parameter Dimensions for Water Distribution Network Models
Water distribution systems contain a large number of pipes whose roughness factors are unknown prior to model calibration. During the calibration process, pipe roughnesses for each link...
Concrete Watertight Structures and Hazardous Liquid Containment
The purpose of
Success Syndrome: The Collapse of the Dee Bridge
Scaling up existing successful designs can cause latent weaknesses to become dominant, leading to catastrophe. By studying past failures where this has happened--for example, the 1847...
Road to Recovery
The effect of the Loma Prieta earthquake on San Francisco's elevated viaduct system is still being felt more than four years later. Immediately after the quake, the entire...
Functional Analysis of the Envelope Design Process for Integrated Building Design
Building envelope failures account for a great portion of building failures. The number of envelope deficiencies would be reduced if the design process was integrated. Integration would...
Pile Settlement Based on Dynamic Measurements
Dynamic measurements during driving are well established for monitoring driving performance and the prediction of pile capacity. Post driving, signal matching office methods (e.g. CAPWAP)...
Analysis of the Juturnaiba Embankment Dam Built on an Organic Soft Clay
The Juturnaiba Dam, located in the northern part of Rio de Janeiro State, Brazil, has 1.2 km of its length built on an organic soft clay about four meters deep. The construction of the...
Down Drag on Friction Piles: A Case History
The down drag settlements experienced by the foundation of a supermarket constructed in 1972 in Gretna-New Orleans, Louisiana are presented. Two different lengths of piles (12.2 m and...
Measured Downdrag on Seven Coated and Uncoated Piles in New Orleans
A site outside of New Orleans, Louisiana was selected as part of a research effort to study the phenomenon of downdrag on bitumen-coated piles. Two steel pipe piles, two timber piles,...
Methods for Risk and Reliability Analysis
Recently, there has been considerable emphasis on the state of decay in the nation's infrastructure because of its importance to society's needs and industrial growth. Water distribution...
Risk and Reliability of Water Resources Infrastructure and Engineering Approaches to Risk and Reliability Analysis
The paper summarizes the second session of the conference which discussed the risk and reliability of water resources infrastructure as well as engineering approaches to risk and reliability...
In Situ Treatment of VOCs by Recirculation Technologies
Confronted with contaminated land from the world wars and the postwar industrialization period, German researchers and practicing professionals have worked to develop processes for effective...
Plain flooding: near field and far field simulations
The paper deals with the problems met in the attempt of simulating the plain submersion produced by a levee breaking in the inertia dominated region (near field), scaling with the typical...
Finite Element Algorithms for Modelling Flood Propagation
The paper details the numerical solutions adopted in the TELEMAC-2D code that solves the shallow water equations. The numerical choices have been driven by the need for computational efficiency...
Object-Oriented Finite Volume Dam-Break Model
This paper is devoted to Object-Oriented analysis and design techniques to two computational modules in the field of dam-breaking. The C++ Object-Oriented...
Return to search