Using Waste Foundry Sand for Hydraulic Barriers
Green sand is a mixture of uniformly graded fine silica sand, bentonite, and organic binders that is used to make molds for castings in gray-iron foundries. Large quantities of waste green...
Recycled Materials for Embankment Construction
Obtaining good quality soils at reasonable costs for use in embankment construction is becoming difficult and hence, attention is directed towards finding alternative materials. On the...
Utilization of Lagoon-Stored Lime in Embankment Construction
The maximum percentage of lime that can be mixed with a predetermined borrow material to build the proposed road embankment without adversely affecting the physical and mechanical properties...
Role of Constituents on the Behavior of Flowable Fly Ash Fill
Flowable fills are increasingly used as backfill materials for pipes and retaining structures because of ease of placement and performance of the solidified material. But the role of its...
The Safe Disposal of Fly Ash in Pavement or Earth Structures Not Requiring High Strength Materials
Highway agencies throughout the country face the challenge of safe disposal of various waste products in pavements and earth structures. Some of these waste products can be hazardous to...
Crushed Hydrated Fly Ash as a Construction Aggregate
Hydrated fly ash (HFA) is being produced in Texas by first adding water to Class C fly ash and allowing it to hydrate in curing pits for several weeks. HFA typically attain unconfined...
Repeated Loading of Stabilized Recycled Aggregate Base Course
The fatigue behavior, resilient properties, and progressive accumulation of damage due to repeated flexural loads on a fiber-reinforced pavement base course material composed of cement-stabilized...
Compaction Characteristics of Contaminated Soils-Reuse as a Road Base Material
Contaminated soils generated from leaking underground storage tanks (USTs) sites are classified as solid waste or non-hazardous waste. Since petroleum contaminated soils are solid waste...
Do Coated Pipes Last Longer?
Field studies have revealed that polymer coated steel pipe resists corrosion longer than pipe coated with other materials. Corrosion is the most common failure mechanism of pipe culvert,...
Geotechnical Earthquake Engineering and Soil Dynamics III
This proceedings,
Cold Regions Impact on Civil Works
This proceedings ,
Recycled Materials in Geotechnical Applications
This proceedings,
Containing the Cold War's Hot Waste
A new method for the construction, verification, and maintenance of underground vaults isolates and contains radioactive burial sites without excavation or drilling in contaminated areas....
Bottoms Up
Placement of dredged material in an environmentally beneficial manner appears to be the trend for the future, considering the economics as well as the increased environmental consciousness...
Superfund Success, Superfast
After 15 years of indecision, unprecedented cooperation among regulatory agencies, community action groups, and Potentially Responsible Parties (PRPs) resulted in the completion of remedial...
Evaluation Findings of the All Sign Products, Inc. Polycarbonate Stop Sign
Prepared by the Highway Innovative Technology Evaluation Center, a CERF Service Center. This report presents the HITEC evaluation of a plastic stop...
Stressing Masonry's Future
Post-tensioning techniques are expanding the possibilities for masonry in building and bridge construction. Two projects in Britain and the U.S. show the rewards of rethinking approaches...
Smooth Take-Off
Rough runway pavement can make for a bumpy flight and nervous passengers. The Port Authority of New York and New Jersey uses an advanced software package to detect and mitigate rough spots...
Better Salt Storage
Facing tighter maintenance budgets and stringent environmental regulations, many highway departments are designing and building innovative structures to store road salt. One such structure...
Hydraulic Fracturing Advances (Available Only in Geoenvironmental Special Issue)
Removing contaminants trapped in clays and nonpermeable soils can be difficult if not impossible with traditional extraction methods. A look at four hydraulic fracturing case studies shows...
Return to search