Temporal and Spatial Variations of Suspended Sediment Concentration during Navigation Traffic in a Natural River
Suspended sediment samples were collected within the channel border area during barge-tow passage events at three cross-sectional locations on the Upper Mississippi River. Typical plots...
Local Scour Potential for Large Bed Material with Shallow Tailwater Depth
Jet momentum acting on a bed particle and submerged jet diffusion theory were employed to derive scour prediction formulas in a plunge pool. Semi-theoretical formulas were suggested for...
Floating Cover Influence on Sediment Transport in Dune-Bed Channels
The results of laboratory flume experiments with a floating cover and a loose bed indicate that, relative to a free surface flow, the increased drag of a floating cover increases flow...
Carpet Flow Analysis
Under very high flow conditions, sediment may be transported either in a suspension or by carpet flow, as defined by Bagnold. This study examines the theoretical conditions for carpet...
Sandbar Formation in Side-Diversion Channels
Prediction of sandbar formation in side-diversion channels is desirable in a wide range of river engineering problems. However, the mechanism by which they form is still not well understood...
Performance of Submerged Vanes for Control of Sediment in an Irrigation Canal
Removal of accumulated sediments from irrigation canals is necessary in order to maintain canal capacity. Removal of these sediments may be enhanced by directing and concentrating sediments...
Theoretical study of unstable waves in the rapids of the river
This paper examines how the velocity distribution in free-surface flow affects the kinematic and dynamic velocities of disturbance waves on hillslopes or in high-gradient rivers, thereby...
Numerical Analysis of High Velocity Flow with Zero-Depth Line and Oblique Shock Wave in Steep Open-Channels
This paper deals with the numerical analysis of 2D steady high velocity flows with the zero - depth line and the oblique shock wave in steep open channels by means of the method of characteristics....
Investigation of an Anisotropic k-? Model
In this paper the eddy viscosity hypothesis is abandoned and explicit expressions of Reynolds stress are deduced directly from the transport equations. Anisotropic k and ? equations are...
Numerical Modelling and Laboratory Verification for the Turbulent Flow Field in the Branching Channel
Adopting the depth-averaged k-? turbulence model and using the finite volume method and SIMPLE procedure, the turbulent flow field in the branching channel is numerically solved and verified...
Thermo-Hydrodynamic Modelling of the Chicago Sanitary and Ship Canal
A one-dimensional numerical model of the Chicago Sanitary and Ship Canal and Lower Des Plaines River has been developed as a tool for assessment of the waterway's thermal response to actual...
Fracture Mechanics Applied to Geotechnical Engineering
This proceedings,
Design of Shotcrete Support from the Rock Mechanical Viewpoint
When designing tunnel support the key question is to determine the loading conditions resulting from the deformation of the rock mass during and after excavation. Principle views are given...
Design and Application of Integrated Shotcrete Linings for Underground Openings in Weak Rock Masses
Tunnels and caverns excavated in weak rock masses require special consideration in terms of shotcrete lining design. Shotcrete as a support medium for weak rock provides major benefits...
Reduction of Head Losses in Tunnels by Means of Shotcrete
Head losses in blasted rock tunnels conveying water to hydropower stations often significantly reduces the energy production in the plant. Typical values on the head losses in tunnels...
Active Tunnel Design?A New Concept for Predesign, Contractual Lay-out and Construction Management
Active tunnel Design is a new concept for design, layout of specification and contract, and for construction management of tunnels and underground carverns. Investigations yeild more information...
Fire Testing of Shotcrete Samples in a Small Furnace
The fire resistance behaviour of 8 shotcrete samples were investigated in a laboratory furnace applying ISO 834 standard test. Shotcrete was applied on 20 to 30 cm thick granite slabs...
Steel Fiber Reinforced Shotcrete?For Rock Support and Fire Protection
Rapid development in concrete technology and development of equipment has led to a change from dry hand-operated to wet robot shotcreting in Norway. Shotcrete of more than 100 MPa cube...
Use of Long, Variable Length Steel Fibres in Shotcrete
Steel wires are cut to fibres in a shotcrete nozzle and directly incorporated in the ejected shotcrete. Long and variable length fibres can be used. The fibre material is better utilized...
Steel Fibre Reinforced Wet Shotcrete with Very High Deformation Capacity
Tests have been carried out under site conditions in Norway where the performance of 40 mm long DRAMIX fibres was compared with normally used 30 mm fibres. The fibres were mixed into the...
Return to search