Discharge Characteristics of Labyrinth Weirs
The hydraulic performance of labyrinth weirs is developed from data obtained from flume studies and site specific models. Using dimensional analysis, an equation for the discharge is developed...
Pipe Spillway Plunge Pool Design Equations
An equation is given to determine if scour holes will beach and widen excessively. For nonbeaching scour holes, dimensionless equations are given for the progression of scour with time...
Riprap Sizing-Four Methods
A comparison summary is provided for sizing of riprap by four methods: Isbash, Froude, Tractive Force - Logarithmic Velocity Profile (TFL), and Tractive Force - Power Velocity Profile...
Adjustable Speed Pumping for Irrigation Networks
Adjustable speed technology can be an economically viable method of accommodating the significant fluctuations in flow and pressure produced by certain irrigation networks. Combinations...
Avoiding Cavitation Damage to Hydraulic Structures
Cavitation damage often may be avoided by not allowing cavities to form. Where boundaries are not deeply submerged, their shape must be exactly correct, irregularities must be very small,...
Modeling Aeration Devices for Glen Canyon Dam
The 41-ft (12. 5-m) diameter tunnel spillways at Glen Canyon Dam experienced major damage during the 1983 spring runoff. This damage was initiated by cavitation. Hydraulic model studies...
Cavitation Inception from Cylindrical Holes
The inception of cavitation due to circular holes in a boundary is studied. Laboratory experiments were conducted to define limited cavitation as a function of the hole depth to diameter...
Prototype Studies of Corps of Engineers Structures Experiencing Cavitation Damage
A number of Corps of Engineers structures have sustained damage caused by the occurrence of cavitation. The damage has varied from slight pitting to severe erosion. The damage has occurred...
Aeration is the Solution for Sluice Cavitation Damage at Libby Dam, Montana
Cavitation has severely damaged two of the high-head flood control sluices. The damaged areas were immediately patched; however, these patches were not considered a solution to the problem....
Laboratory Studies of Cavitation in Corps of Engineers Hydraulic Structures
A selected bibliography of significant hydraulic laboratory research efforts by the U. S. Army Engineer Waterways Experiment Station to identify the likelihood of and means of preventing...
Movable-Bed Model Investigation of Littoral Drift on the Intake and Outlet of Lin-Kou Power Plant (I)
The establishment and operation of a distorted movable-bed model of the cooling water intake and outlet is described. The model employed is a three-dimensional movable-bed Froude model...
Prediction of Dam Overtopping Due to Mudflows
The eruption of Mount St. Helens on May 18, 1980 resulted in a small mudflow into Swift reservoir, which is located immediately south of the mountain. An engineering/geologic study was...
Modeling of a Multifunctional Hydraulic Structure
A 1:12 scale Froude model of a hydraulic control structure in the Rochester Combined Sewer Overflow Abatement Program (RCSOAP) was constructed and tested to optimize the design requirements...
Physical Hydraulic Modeling for a Small Hydroelectric Redevelopment
In the development of a small hydroelectric project, the operating head on the plant is usually limited. On these projects, the need to minimize head losses and eliminating other factors...
Hydraulics and Hydrology of Border Irrigation
Proper description of the hydraulics of irrigation of farmland is necessary in management. Many descriptions of furrow or border irrigation are not adequate to describe truly physically...
Ice Block Stability
A simple formulation of the forces acting on an ice block in contact with an intact ice cover is presented. Underturning of the ice block is the assumed mechanism by which the block is...
Modeling Intake Performance Under Frazil Ice Conditions
A water intake was modeled in a refrigerated flume in an active frazil icing environment in order to evaluate alternative modifications to the prototype structure. Tests were run until...
Hydraulics of Freeze-up
A classification scheme for freeze-up of a river is proposed based upon the response of indicated stage. A conceptual model is developed to describe the course of the indicated responses....
Information Retrieval Sources and Availability in Hydraulics
There is a very general unawareness of information available on hydraulic studies, application of these studies and import for other projects, and results of new project design methods....
River Basin Management: Role of Hydraulics and Hydrology
One of the major Illinois rivers originates in a neighboring state. The main stem of the river was channelized about 65 years ago, and is considered to be a 'drainage ditch....
Return to search