Chaotic Analysis of Dynamic Bifurcation of Viscoelastic Shallow Arches
Periodic and chaotic motions in a mathematical model of an imperfect, viscoelastic shallow arch under a dynamic sinusoidal load for both the symmetric and the coupled unsymmetric responses...
Cumulants of the Nonlinear Combination of Independent Random Variables
A random variable of interest is often the sum of linear or nonlinear combinations of many independent random variables. In calculating the statistics of this random sum, advantages of...
Response of Nonclassically Damped MDOF Systems to Nonstationary Random Excitation
A procedure for calculating the dynamic response of a nonclassically damped multi-degree-of-freedom (MDOF) system to nonstationary non-white vector-valued random excitation is developed...
Response Triscpectrum for a Yielding Structure
Simulation is used to obtain information about non-Gaussian aspects of the absolute response acceleration of a bilinear hysteretic oscillator with an excitation which is Gaussian white...
Adequacy of Statistical Linearization for Nonlinear Degrading Structural Systems
An investigation is carried out to examine the validity of current practice in using statistical linearization method for nonlinear degrading structures subject to random ground acceleration....
A Comparison of Modeling Techniques for the Buckling of Stiffened Shells
Different techniques are used to compute the collapse loads of a family of stiffened shells. Large differences are observed between the various predictions. Detailed numerical studies...
Flexural and Extensional Motion of Moderately Thick Laminated Composite Plates
A general theory of flexural and extensional motion of moderately thick laminated composite plates is developed for linear elastic materials and small deformation. Interlaminar stresses...
Use of Laser Holography and Image Analysis for Crack Measurement and Determination of Strain Fields in Cement Based Materials
The authors have successfully used laser holographic interferometry to measure various parameters, such as crack size, crack spacing, crack opening displacement, surface displacements...
Visualization of the Microstructural Response of Lightly-Cemented Granular Soils Under Uniaxial Strain Conditions
The microstructural response of granular soil under uniaxial strain is being investigated through direct observation of micromotions. Two techniques are being refined to quantify individual...
The Application of Computerized Tomography for Determining Material Properties
X-ray computerized tomography (CT) is an imaging technique that has been used by the medical community for a number of years and is well documented. However, the adaption of this technique...
Experimental Techniques to Study the Microstructure of Cement-Based Materials
Techniques to identify phases and changes in microstructure within cement paste, mortar, and concrete using a scanning electron microscope and image analysis system are described. Backscattered...
Cement and Concrete Characterization by Scanning Electron Microscopy
The scanning electron microscope (SEM) is a powerful tool for the microstructural and chemical characterization of cement and concrete. Imaging techniques such as secondary electron, backscattered...
Atomistic Simulation and Visualization of Thermal Disorder in a Crystalline Ice
The process of thermal disorder in crystalline ice has been simulated using a molecular dynamics model. The thermal disorder is induced by raising the temperature of the system. The molecular...
Microscopic Modeling of Shear Strength of Contaminated Soils
The degradation of shear strength of soils due to prolonged contamination of soils is an emerging problem. The experiments conducted at New Jersey institute of Technology showed a gradual...
Numerical Experiments for Anisotropic Behavior of Granular Materials
A three dimensional discrete element computer code 'TRUBAL' is used to investigate the effect of initial anisotropy on stress-strain and volume change characteristics...
Computer Simulations of Rapid Granular Flows Interacting with a Flat, Frictional Boundary
This paper compares the results of numerical simulations for the rapid, steady flow of identical spheres colliding with a flat frictional boundary with the recent predictions of Jenkins...
Simulations of Gravity-Driven Channel Flows of Disks Floating on the Flowing Viscous Fluid
A two-dimensional discrete element model has been applied to the problem of gravity-driven channel flow of uniform disks. The particles are floating on the surface of the flowing fluid...
Simulation of the Quasi-Static Deformation of 2D Assemblages of Rigid Discs
Although the importance of dilatancy in the constitutive behaviour of granular materials has been recognized for some time, conclusions about its evolution and dependence on different...
Computer-Monitored Grouting
With grouting operations going on at many locations around the clock on a typical large dam-foundation project, how do you make sure that the designed mix is always being used and as-built...
Assessing Community Safety for Hazardous Materials Transport
This paper describes a computer model developed to assess the safety of a community through which hazardous materials will be transported. The model is predictive and can be used even...
Return to search