Discrete Feature Modelling at the Stripa Mine in Sweden: Significance for Hydrologic Modelling of Fractured Rock Masses
The third and final phase of the Stripa Project included a series of characterization efforts, predictions, and validations to determine the viability of discrete-fracture groundwater...
Modeling of Strongly Heat-Driven Flow Processes at a Potential High-Level Nuclear Waste Repository at Yucca Mountain, Nevada
Two complementary numerical models for analyzing high-level nuclear waste emplacement at Yucca Mountain have been developed. A vertical cross-sectional (X-Z) model permits a realistic...
Modeling of the Ventilation for Emplacement Drift Re-Entry and Rock Drying
Different ventilation scenarios were analyzed for a hot repository with a 114 kw/Acre heat load, to determine the time required to cool a drift to the point where the temperature of the...
Hydrogeochemical Site Investigations by Teollisuuden Voima Oy, Finland
Groundwater samples collected from cored boreholes (500-1000 m), borehole wells and multilevel piezometers in crystalline bedrock have been characterized and classified. The reference...
Modelling Colloidal Transport of Radionuclides Through Porous Media
General acknowledgement of the potential role of colloids in enhancing radionuclide transport has prompted the preliminary development of a mechanistic colloid transport model as part...
The Role of Fault Zone in Affecting Multiphase Flow at Yucca Mountain
Within Yucca Mountain, the potential High Level Nuclear-Waste Repository site, there are large scale fault zones, most notably the Ghost Dance Fault. The effect of such high-permeability,...
Studies of the Role of Fault Zones on Fluid Flow Using the Site-Scale Numerical Model of Yucca Mountain
The three-dimensional grid of the site-scale model developed for the unsaturated zone at Yucca Mountain was used to perform two-dimensional simulations with the TOUGH2 computer program....
Geohydrologic Data and Models of Rainier Mesa and Their Implications to Yucca Mountain
The geohydrologic data collected at Rainier Mesa provide the only extensive observations in tunnels presently available on flow and transport in tuff units similar to those of a potential...
Discontinuities, Rock Deformation and Fluid Flow Around Emplacement Rooms
One of the major concerns for the design of the potential nuclear waste repository at Yucca Mountain is how to identify the fast flow paths and how to minimize the flow of the fast paths....
Sensitivity and Probabilistic Analyses of Ground Water Travel Time in a Fractured and Variably-Saturated Geologic Medium
This paper presents a method for sensitivity and probabilistic analyses of performance of a hypothetical nuclear waste repository located in a layered, fractured, and variably-saturated...
Review and Selection of Unsaturated Flow Models
The Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M&O) is conducting a thorough review and evaluation of existing flow and transport models....
Post-Irradiation Fuel Assembly Dimensions for Transportation and Storage Cask Designs
When designing casks for the shipment of Spent Nuclear Fuel (SNF), one of the most important considerations is the external dimensions of the fuel assemblies to be shipped. Since SNF assemblies...
Field Investigation of Mining-Induced Seismicity on Local Geohydrology
Hydraulic response of the rock mass due to earthquakes is one of the concerns in the assessment of the long-term performance of a repository. Studies performed by other researchers indicated...
Evaluating Soil Moisture and Hydraulic Conductivity in Semi-Arid Rangeland Soils
The United States Department of Energy's Office of Civilian Radioactive Waste Management (DOE-OCRWM) Fellowship Program supports various disciplines of academic research related to the...
Estimation of Water-Filled and Air-Filled Porosity in the Unsaturated Zone, Yucca Mountain, Nevada
The responses of density and dielectric logs are formulated in terms if the matrix properties, air-filled porosity and water-filled porosity. Porosity values obtained from logs from borehole...
Effects of Core Sealing Methods on the Preservation of Pore Water
Five general core sealing methods (using Protecore, Lexan, wax, Protecore with wax, and Protecore with Lexan) were studied over a two year period to determine their moisture retention...
Full-Field Dye Concentration Measurement Within Saturated/Unsaturated Thin Slabs of Porous Media
This paper presents a full-field dye concentration measurement technique that extends our experimental capabilities to the measurement of transient dye concentration fields within steady...
Determination of Water Content in Unsaturated Flow Experiments Using TDR and Capacitance
Electromagnetic techniques have been used for many years for the determination of moisture content in materials. We are adapting two of these techniques to the estimation of moisture in...
Inference of Moisture Content in Unsaturated Media Using Ultrasonics
This study focuses on the ability of commercial ulltrasonics equipment to determine the moisture content in unsaturated media. We are interested in the possible application of this technology...
Effect of Interconnection of Fractures on Dispersion in Flow Through Fractured Networks
A stochastic modeling technique in a 2-D discrete fracture network with two orthogonal sets of fractures is developed to investigate mass transport dispersion and to investigate the relation...
Return to search