ASCE will be sunsetting the Civil Engineering Database (CEDB) on June 30, 2025. We encourage you to start using the ASCE Library to perform content searches. In the ASCE Library, you can save your search results as well as receive email content alerts when new content relevant to your area of interest is published. Try it out today at https://ascelibrary.org.

 

Brass Factory to Regional Mall: A Model Brownfield

Case History of a Successful Brownfields Site in Wichita, Kansas. Part 1: Innovative Approaches to Funding and Liability

Case History of a Successful Brownfields Site in Wichita, Kansas. Part 2: Innovative Approaches to Remediation

Construction Ground Movement Impacts on the Central Artery/Tunnel Project

Structure Heave and Settlement Due to Pile Driving: A Case History

Displacements of Structures and BART Tunnels Caused by Construction of MUNI Metro Turnback in San Francisco

Ground Movement, Building Response, and Protective Measures

Small Project, Big Karst Problem, Solved with Compaction Grout

Monitoring Construction Vibrations

Building Response to Adjacent Excavation and Construction

Composite T-Panel Slurry Walls Adjacent to the Historic State Street Block

Geotechnics of Industrial By-Products
Large volumes of industrial by-products are generated each year by U.S. industries, and most are landfilled as solid waste at considerable expense. However, many by-products have desirable...

Paper Mill Sludge Landfill Cover Construction
A considerable amount of experience has been acquired from a number of completed paper mill sludge landfill covers within the United States. This paper focuses on practical guidelines...

Mitigation of Void Development under Bridge Approach Slabs Using Rubber Tire Chips
The problem of void development under bridge approach slabs has been correlated to the use of integral abutment bridges (Schaefer and Koch, 1992). This void development then causes settlement...

Tire Shreds as Lightweight Fill for Embankments and Retaining Walls
Use of tire shreds in three highway projects is described. In the first project, tire shreds were used as a compressible inclusion to reduce pressures on a rigid frame bridge. Earth pressures...

Geotechnical Performance of a Highway Embankment Constructed Using Waste Foundry Sand
A highway embankment was constructed near Auburn, Indiana, using waste foundry sand (WFS) as a demonstration project for the Indiana Department of Transportation (INDOT). Laboratory testing...

Using Waste Foundry Sand for Hydraulic Barriers
Green sand is a mixture of uniformly graded fine silica sand, bentonite, and organic binders that is used to make molds for castings in gray-iron foundries. Large quantities of waste green...

Recycled Materials for Embankment Construction
Obtaining good quality soils at reasonable costs for use in embankment construction is becoming difficult and hence, attention is directed towards finding alternative materials. On the...

Utilization of Lagoon-Stored Lime in Embankment Construction
The maximum percentage of lime that can be mixed with a predetermined borrow material to build the proposed road embankment without adversely affecting the physical and mechanical properties...

Behavior of Construction and Demolition Debris in Base and Subbase Applications
The design performance of a pavement system is evaluated based on the predicted number of load repetitions it will be subjected to throughout its service life. Mechanistic pavement design...

 

 

 

 

Return to search