Resource Recovery Mass-Burning Incineration
The various types of incineration systems are discussed, and the technical and economic factors to be considered in developing a resource recovery project are examined....
Quality Assessment Standards & Low-Level Nuclear Waste: How Standards Have Been Developed and Applied
The authors examine the application of organized quality assurance procedures to the nuclear industry since 1970....
Codisposal of Low-Level Radioactive Cobalt Within Sanitary Landfills
The potential of resolubilization of radioactive cobalt from cobalt sulfide by humic substances present in landfill leachate was investigated. Equilibrium and kinetic studies on the potential...
Method Development for Evaluating Radionuclide Emissions from Incineration of Low Level Radioactive Waste
The implementation of an incineration monitoring program for low level radioactive waste is a complex task, especially in the area of obtaining environmental permits. Emissions monitoring...
Water Diversion at Low-Level Waste Disposal Sites
Shallow depth to groundwater, surface drainage, and subsurface flow during storm events are major environmental concerns of low-level radioactive waste management operations in humid regions....
Electrically Fired Incinerator System for Combustible Radioactive Waste
DuPont Company and Shirco, Inc. are developing a process to incinerate plutonium-contaminated combustible waste in an electrically fired incineration system. Preliminary development was...
A Systems Approach for Wasteload Allocations
A methodology for determining an optimal periodic permit for a single discharger situation was developed which accounts for effluent variability, as well as the variability of the receiving...
The Use of Activated Carbon as a Polishing Step for Treatment of Industrial Plating Wastewaters
An activated carbon adsorption process was utilized as a polishing step following the precipitation (hydroxide or sulfide) process. Zinc and cadmium were the metals studied. Since plating...
Industrial NPDES Toxicity Goals
Biological monitoring of NPDES (National Pollution Discharge Elimination System) effluents is becoming a reality in several EPA regions. While the advantages are genuine the loopholes...
Factors Influencing Zinc Cementation of Cadmium
The research reported here examines an innovative procedure for removal of cadmium from wastewaters. This process is the cementation of cadmium by zinc metal. Cementation is highly attractive...
The Adsorption Characteristics of NI (II) Onto Bubble Surface
The removal of Ni(II) by foam fractionation is brought about by the electrostatic mechanism. From removal and zeta potential measurements, it clearly demonstrates that Ni**2** plus and...
Fixation of Chromium and Cadmium from Electroplating Waste Sludges
The authors compare the effectiveness of two fixation techniques, namely silicate-cement and lime-fly ash, for immobilizing chromium and cadmium in a waste sludge obtained from an electroplating...
Development of a Simplified Nitrogen Mass Balance Model in a Macroalgae Dominated System
A seasonably variable nitrogen uptake rate has been established for Ulva in Mumford Cove, Conn. This rate has been verified using three separate water quality analyses each of which assume...
PCB Contamination of a Mass. Harbor: Technical Challenges for a Remedial Solution
The highest priority uncontrolled site in Massachusetts, the New Bedford Harbor Superfund site, is contaminated with high concentrations of PCBs. The magnitude and nature of contamination,...
In-Plant Testing for Evaluating Aeration Systems
In the fall of 1984, ASCE published a standard, Measurements of Oxygen Transfer in Clean Water. The standard, if used by the industry, should simplify evaluation of alternative aeration...
A New Approach to Activated Sludge Plant Design
Activated sludge plants are designed on the basis of stationary tests at laboratory scale for constant organic loads and constant input flows. From these tests the kinetic parameters are...
Measurement of Activated Sludge Rheology
Rheological measurements provide fundamental information on the physical properties of activated sludge. Such properties influence the behavior of activated sludge in wastewater and sludge...
Impoundment Design for Precious Metal Tailings
An engineering study and design of impoundments for the disposal of mill tailings in central Nevada is presented. Mill process waste is generated as flotation tailings and cyanide residue....
Field Scale Solidification/Stabilization of Hazardous Wastes
The selection of appropriate remedial action measures only takes place after a full evaluation of all feasible alternatives. An alternative to off site disposal is solidification/stabilization...
Variable Leachate Treatment System: A Cast Study
This paper explores the experience of the authors in collecting data and designing leachate collection and treatment facilities at municipal sanitary landfills over the last several years....
Return to search