Analyzing Uncertainty of IUH of Nash
Uncertainties in hydrologic modeling are the primary factors affecting the reliability of hydraulic structures. Among various hydrologic rainfall-runoff models for engineering applications,...
Large-Scale Embankment Overtopping Protection Tests
The U.S. Bureau of Reclamation (Reclamation), Colorado State University (CSU), and the Electric Power Research Institute (EPRI) have an ongoing cooperative research effort to determine...
Progressive Failure of an Overtopped Embankment
The failure of an overtopped embankment is a problem of a very complicated nature. Concerned organizations are interested in information that can be used in future planning and development...
A New Type of Concrete Trapezoid Dam
A new type of 128.0 m height concrete trapezoid dam (t-d) has been built for the Wunana Town Hydroelectric Power Station (WTHPS). The paper presents its optimum section design, several...
Bank Stabilization with Environmental Features on the Middle Rio Grande
River maintenance on the middle Rio Grande has changed significantly since channel work began in the mid 1950's. Past practices included pilot or relocation channels, vegetation control,...
Evaluation of an Existing Scour Hole at the Castleton Bridge, a Tidal Crossing
Several fathometric surveys conducted in recent years showed a large depression or scour hole on the downstream southeast corner of the central pier of the Castleton Bridge over the Hudson...
Uncertainty Analysis of the FEMA Method for Alluvial Fans
Distributary flow areas such as alluvial fans, bajadas, and alluvial slopes, and alluvial plains along mountain bases pose quite different and interesting problems for the design of hydraulic...
Mixing Character and Meandering Mechanism of a Plane Jet Bounded in a Shallow Water Layer
A plane jet in a shallow water layer is characterized by the jet width b1/2 much larger than the water depth h at large downstream distances x/h...
Structure of Coastal Upwelling on a Sloping Bottom
A large eddy simulation of coastal upwelling on a sloping bottom is carried out. The structure of the upwelling consists of a persistent primary front, a temporary secondary front which...
River Engineering Flows and Some Related Structures (State of the Art)
The first part of the paper deals with a simplified overall review of water flows. Laminar versus turbulent, visualization of flow with unsteady 3-D manner and some typical hydraulic structures...
Bridge Scour Evaluations in Washington State
Eighteen existing bridges were investigated for Washington State DOT as part of the FHWA National Scour Evaluation Program. Investigations included review of file information, site inspection,...
Simulation of 3D Free Surface Flows in Hydraulic Structure with Submerged Flow Passages
This paper presents primarily the results of an application of the newly refined computational simulation model to study three-dimensional flows in a lock and dam system, which has submerged...
Modeling the Tides of Massachusetts and Cape Cod Bays
A time-dependent, three-dimensional numerical modeling study of the tides of Massachusetts and Cape Code Bays, motivated by construction of a new sewage treatment plant and ocean outfall...
Flow Diversion in a Steep, Coarse-Bed Stream
A case study is presented of the hydraulic design of a diversion structure in a high velocity, coarse bed streamcourse. Mill Creek, a tributary to the Upper Jordan River in the southern...
Composite Construction?Recent Past, Present and Near Future
The present paper covers a shorter time span. It is divided into three parts: recent past, present and near future. The remarks regarding the recent past are limited to my personal experiences....
New Developments in Eurocode 4
The European Community has initiated the preparation of a set of harmonized structural codes. Eurocode 4 is the code for the design of composite steel and concrete structures. The first...
New Canadian Provisions Related to the Design of Composite Beams
In this paper, the new provisions in CAN/CSA-S16.1-M89 for the design of composite beams, together with reasons for changes, are discussed. Some of the new provisions reflect results of...
Composite Beams: Redistribution, Reliability, and Lateral Buckling
Research relevant to three aspects of the design of composite beams for ultimate limit states is summarized. These are: the redistribution in continuous beams and in framed structures...
Two Full-Scale Tests of Class 3 Composite Beams
This paper presents two tests of continuous composite beams comprising two 7.5 m spans and two concentrated loads close to the intermediate support. Although the cross-sections on the...
Shear Connection in Composite Beams
This paper considers the influence of the shape of the deck profile on the shear connection of composite beams. It was found that the existing strength reduction factor can be unconservative...
Return to search