Less Bang for the Buck
Blasting rock is practical on job sites with ample space, but on construction sites in urbans or developed settings, contractors are shying away from blasting for several reasons. Noise...

Shop Drawings: In Need of Respect
Engineer Robert L. Boehmig voices his concerns regarding the preparation of structural shop drawings. He gives his view of the shop drawing's role in construction projects,...

Managing Local Socioeconomic Impacts Through Project Management Policies Concerning Subsidized Transportation, Site Access, and On-Site Housing
The Department of Energy (DOE) has a legislative mandate to avoid, minimize and mitigate any adverse impacts to local communities resulting from activities at the Yucca Mountain Repository...

A Proposed Methodology for Validating Performance Assessment Models for the DOE Office of Civilian Radioactive Waste Management Program
The Department of Energy (DOE) has developed a draft methodology for validating performance assessment models that will be used in the licensing of high-level waste repository systems....

Status of Integrated Performance Assessment of the Waste Packages and Engineered Barrier System
Performance assessment of the engineered barrier system for a nuclear waste repository combines information from relevant disciplines and predicts the net long-term performance of the...

TN28V High Capacity Cask for the Transport and Storage of Vitrified Wastes
When the option of reprocessing has been selected, closing of the fuel cycle implies the return shipment of reprocessing wastes back to the country of origin of the spent fuel, in particular...

A Numerical Study of Some Effects of Nuclear Fuel Waste Vault Construction and Closure on Evolution of Groundwater Flow Paths in the Geosphere
We have performed a series of three dimensional finite-element simulations on the sensitivity of the groundwater flow paths and travel times in a conceptual hydrogeological model with...

Simulation Modeling of Subsurface Development
This paper discusses the use of simulation modeling in analyzing subsurface development activities and estimating associated costs at the Yucca Mountain candidate repository site. Described...

Trends in Waste Management Program Costs: An Evolution of Estimating Methods and Results
The purpose of this paper is to present a summary of how the program cost projections contained in the five TSLCC analyses performed to-date and the estimating methods used to make these...

Materials Selection Issues for Structural Components of Transportation Casks
Sandia National Laboratories (SNL) is evaluating the use of alternate materials (i.e. other than stainless steel) as structural components in nuclear spent fuel transportation casks. This...

Programmatic Challenges and the Value of Testing on the West Valley Demonstration Project's Vitrification Facility Design
The primary objective of the West Valley Demonstration Project (WVDP) is the solidification of approximately 2.1 million liters (560 thousand gallons) of high-level waste (HLW) which resulted...

An Overview of the Vitrification of Defense High-Level Waste at the Hanford Site
Nearly 63 percent of the nation's high-level nuclear waste has accumulated at the U.S. Department of Energy's (DOE) Hanford Site in Washington State. This accumulation...

The International Stripa Project: Technology Transfer From Cooperation in Scientific and Technological Research on Nuclear Waste Disposal
The Nuclear Energy Agency of the Organization for Economic Cooperation and Development (OECD/NEA) sponsors the International Stripa Project. The Stripa Project is open to participation...

The Status of the Site Characterization and Validation Program in Phase III of the OECD/NEA Stripa Project
In 1980, the International Stripa Project was organized under the aegis of the OECD Nuclear Energy Agency for the purpose of conducting research, at the Stripa mine in Sweden, related...

Site Selection Criteria for Constructing an Independent Spent Fuel Storage Installation (ISFSI) at a Commercial Nuclear Power Plant
Commercial nuclear power plants in the U.S. are responsible for providing their own interim storage for excess spent fuel. A facility located onsite, acting as a buffer between in-pool...

Concrete Cask Storage Technology
The paper presents the design and operation of the new dry storage system for nuclear waste. The system was designed by complete nuclear, thermal-hydraulic and structural analysis to the...

Properties of the West Valley Waste Form
The centroid composition of the West Valley Demonstration Project waste form has been selected on the basis of criteria mandating high chemical durability and good processibility. A review...

Computed Distributions of Residual Shaft Drilling and Drift Construction Water in the Exploratory Facilities at Yucca Mountain, Nevada
The Yucca Mountain Project is studying the feasibility of constructing a high-level nuclear waste repository at Yucca Mountain in southwest Nevada. One activity of site characterization...

Research for Final Disposal of Unreprocessed Spent Nuclear Fuel in Sweden
The second Swedish programme on research, development and demonstration in the nuclear radioactive waste management area was submitted by SKB to the Swedish National Board for Spent Nuclear...

Preliminary Conceptual Design Description of the Proposed DOE Store-Only Monitored Retrievable Storage (MRS) Facility
The Nuclear Waste Policy Act (NWPA) of 1982 required DOE to examine the options for the provision of long term spent fuel storage in monitored retrievable storage (MRS) facilities. Specifically,...

 

 

 

 

Return to search