Equivalent Statistical Quadratization of Nonlinear Hydrodynamic Loads on TLPs
In this paper, a new method is proposed for the expansion of nonlinear drag forces expressed in terms of multivariate Hermite polynomials correct up to the second-order. The drag force...
Dynamic Response Characteristics of Jack-Up Drilling Units
The effects of five parameters on the dynamic amplification of the global base shear on a deep water jack-up drilling unit were analyzed using a time domain nonlinear model. The five parameters...
Use of X-Ray Computed Tomography in the Study of Marine Sediments
X-ray computed tomography (CT scanning) is primarily a medical imaging technique. When applied to marine sediments, it responds predominately to the spatial density distribution within...
Piles Under Dynamic Loads
This proceedings,
Electrokinetic Cleanups
Electrokinetic remediation of contaminated soils is a relatively new research area. Electrokinetic phenomena can be used to create barriers, and move particles, including pollutants such...
Civil Engineering in the Oceans V
This proceedings is a collection of technical papers presented at Civil Engineering in the Oceans V (CEO V) specialty conference held at College Station, Texas on November 2-5, 1992. Initiated...
Dynamic Wind Loads
This chapter is concerned with the motions of cable stayed bridges that arise as a result of wind action. The aerodynamic phenomena that must be considered are vortex shedding, torsional...
MUT1D: User-Friendly One-Dimensional Thermal Model
MUT1D is a microcomputer-based heat conduction model which uses implicit finite difference techniques to determine the thermal regime and track the movement of the phase change front in...
Computer Predictions of Thaw Beneath Gravel Embankments on Warm Permafrost
A computer model was used to simulate the freeze-thaw effects of gravel embankments on warm permafrost typical of south-central Alaska using a one-dimensional finite-difference code, FREZ1D....
Analysis of Waterbody Surface Heat Exchange
The Edinger-Duttweiler-Geyer (EDG) approach for estimating heat exchange at a water surface was examined and its applicability to ice-covered waterbodies determined. The EDG linearized...
A Conceptual Model for Vertical Frazil Distribution in Turbulent Flows
A conceptual model is presented for the evolution of frazil over depth in a turbulent flow. The net upward migration due to buoyancy of the frazil is opposed by intermittent mixing induced...
Heat Exchange at the Ice/Water Interface on Flowing Water
Any time the water flowing under an ice cover has a temperature above freezing, there is an exchange of heat between the water and the ice. Earlier work by Ashton and others provided adequate...
Radar Monitoring of Ice on the Upper Niagara River
A standard marine radar was used during the winter of 1987-88 to evaluate its potential to monitor the presence and movement of ice in the Grass Island Pool area of the upper Niagara River....
Application of Ice/Structure Interaction Concepts to a Real Time Ice Risk Assessment Computer Model
The successful and safe operation of an Arctic offshore exploration structure greatly depends on the implementation of alerts procedures. In order to assess alerts levels, a computer model...
Multiphase Flows and the Modeling of Drifting Snow
Three categories of multiphase flow theories are commonly specialized for modeling drifting snow; the 'two-fluid' model, particle tracking schemes and kinetic...
New Support for Pin-Hanger Bridges
To promote safety of their bridges, many state highway departments are considering ways to add auxiliary support to existing pin-hanger bridges. The Pennsylvania DOT and its open-end consultant...
Introduction to Structural and Mechanical Failure Modes for Nuclear Power Facilities
The three papers presented in this section discuss the types of information (i.e., dynamic tests, earthquake experience and analytical data) which are used in predicting the capacity of...
Approximate Methods of Structural Analysis: Principles and Pitfalls
In this modern age when the trend in structural engineering and structural engineering education is to make more and more use of computers and standard structural analysis programs, there...
The Boundary Element Method in Engineering Practice
The boundary element method (BEM) provides an excellent basis for the development of integrated design and analysis systems. The technique possesses the advantages of simple model generation,...
Verification of Advanced Analysis Techniques
As a designer there is a concern over the complexity of analysis required by design specifications and building codes because it forces engineers into types of analysis for which many...
Return to search