Sea Ice Indentation Accounting for Strain-Rate Variation
Two levels of ice loading are typically considered in the design of drilling and production platforms for the Arctic. Global ice pressures govern the overall structural geometry and dimensions...
Ice Load Prediction with the Use of a Rate-Dependent Anisotropic Constitutive Law
Man-made structures built in arctic offshore areas are subject to ice loads. Traditional methods for estimating ice loads rely on an indentation factor from rigid-plasticity, an empirical...
Spalling and Buckling of Ice Sheets
The effect of local eccentricity in the vertical direction on the magnitude of compressive strength of wide ice sheets is studied theoretically. Two new failure modes are identified: indentation...
Validation of the CICE Code for Ice Ride-Up and Ice Ridge Cone Interaction
The discrete element method is capable of analyzing multiple, interacting, deformable, discontinuous or fractured bodies undergoing large motions and rotations. The formulation solves...
Deep Water Bering Sea Development Concepts
A brief description of the major environmental factors that a structure used to produce oil and gas in the deep water Bering Sea would have to cope with is presented. In particular, the...
Single Point Moorings for the Bering Sea
Multi or single-legged buoy systems such as conventional CALMs or SALMs would not survive the winter season in the Bering Sea because the forces generated in the anchoring chains by pack-ice...
Deep-Water Platform Solutions for the Navarin Basin
The environmental conditions prevailing in the Navarin Basin may impose limitations on the type and shape of production, storage and loading structures. The magnitude of the wind and wave...
Foundation Response of Arctic Structures to Time-Dependent Ice Loadings
Arctic structures are subjected to a variety of time-dependent loadings, the most important of which are those due to ice. An approach is presented for estimating the strength and deformation...
Developing a Drilling Structure for Arctic Waters
Fluor-Doris of Houston has developed a mobile, composite concrete and steel drilling structure called the Arctic Composite Platform (ARCOP). This platform is capable of operations in water...
Arctic Drilling and Production Platform Concept
An 80-well Arctic drilling and production platform for water depths to 100 feet in the Beaufort Sea transition ice zone is presented. It includes a novel inner caisson to help resist large...
A Hybrid Structural Ice Defense Mechanism
A hybrid plate composed of steel outer surfaces and a concrete core has characteristics that make it desirable for use on offshore structures in ice prone environments. The service and...
Ice Forces on Port Structures Resulting from Moving Ships
Results are described of experiments carried out in Thunder Bay Harbour in March, 1984, to measure ice forces on a port structure. Ice forces were measured by installing five pressure...
Local Pressure in Ice-Structure Interactions
Two models for the determination of local pressures during marine ice or iceberg collisions with bottom-founded structures are presented. The first model is a two-dimensional analytical...
Longterm Changes of Tidal Regime in the German Bight (North Sea)
Sea level changes are caused by astronomical tides (periodical changes), meteorological, geological and oceanographical conditions, vertical movements of the earth's crust...
Project Mixes Oil and Water
The Prudhoe Bay Seawater Treatment Plant was nominated for an OCEA award, for its potential to coax from Alaska's north slope 1 billion barrels of oil which otherwise would...
Hydrothermal Model Study of Stratified Flow in a Power Plant Cooling Water Recycle/Intake Canal: Reynolds and Densimetric Froude Number Effects
During the winter of 1983-1984, the control of frazil ice at the trash tracks using pneumatic air guns was evaluated at Danskammer Point Generating Station. This paper presents a brief...
Data Acquisition in USACRREL'S Flume Facility
A computerized data acquisition system has been developed that is based on a Hewlett-Packard 9845B desktop computer. The system allows determination of highly accurate water temperatures,...
Cazenovia Creek Model Data Acquisition System
The purpose of the model is to reproduce river ice breakup phenomena for optimizing the design of an ice control structure. The performance of the ice control structure during a simulated...
Instrumentation for an Uplifting Ice Force Model
Pile-supported, light duty structures are especially vulnerable to the uplifting forces. To evaluate the parameters that control the magnitude of the uplifting force a laboratory model...
Controlling River Ice to Alleviate Ice Jam Flooding
Many communities affected by ice jam flooding have accepted the event as unpreventable. Others have approached their problem as one of open channel flow and implemented standard projects...
Return to search