Using Waste Foundry Sand for Hydraulic Barriers
Green sand is a mixture of uniformly graded fine silica sand, bentonite, and organic binders that is used to make molds for castings in gray-iron foundries. Large quantities of waste green...
Long-Term Effects of Suspended Solids Loads on Constructed Wetland Performance
Discussion session summary....
Hydraulics of Open Channel Flow
This text is designed to make a deliberate effort to extend the modern fluid mechanics approach into the analysis of open channel flow without necessarily requiring the use of advanced...
Water Resources Engineering '98
This proceedings,
Sky High
The increasing demand for personal communication services (PCS), such as digital cell phones and pagers, as well as digital television (DTV), has created new challenges for creating and...
The Invisible Infrastructure
Most developed countries have 50- to 100-year-old underground utility systems that carry far greater loads than their designs. They're difficult to repair or replace, yet...
Design and Construction of Earth Retaining Systems
This proceedings,
Shake, Rattle and Hold (Available in Structural Engineering Special Issue Only)
In-situ lateral load tests of two bridge bents were conducted on Interstate 15 in Salt Lake City, Utah, to determine the strength and ductility of an existing concrete bridge and the improvements...
On Solid Ground (Available only in the Geoenvironmental Special Issue)
On four transportation projects in Portland, Ore., soil nails and micropiles are used as alternatives to conventional earth-retention and foundation systems. The use of soil nails and...
Seismic and Dynamic Analysis and Design Considerations for High Level Nuclear Waste Repositories
This committee report was created to fulfill two primary objectives: 1) to provide guidance for assessing and defining the dynamic loads that must be considered in the design of a repository...
Channel Stability Assessment for Flood Control Projects
This manual provides assistance for determining potential channel instability and sedimentation effects in flood control projects. It is intended to facilitate consideration of the type...
Building Tension in Buffalo
The National Hockey League's Buffalo Sabres have a new home, topped with an unusual tension-braced domed roof. An ingenious combination of dome designs, the Marine Midland...
Hydraulic Fracturing Advances (Available Only in Geoenvironmental Special Issue)
Removing contaminants trapped in clays and nonpermeable soils can be difficult if not impossible with traditional extraction methods. A look at four hydraulic fracturing case studies shows...
Taking in the River
As dams across the country age, so do their intake gates, and testing them requires dewatering. To meet the challenge of dewatering these structures without upsetting sensitive aquatic...
Design of Hydraulic Steel Structures
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 22 This manual prescribes guidance for designing hydraulic...
Wind Loads and Anchor Bolt Design for Petrochemical Facilities
Current codes and standards do not address many of the structures found in the petrochemical industry. Therefore, many engineers and companies involved in the industry have independently...
John F. Kennedy Student Paper Competition and Specialty Seminar Summaries
This proceedings,
Structural Design of Closure Structures for Local Flood Protection Projects
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 21 This guide provides a framework for the structural...
Waterpower '97
This proceedings consists of papers presented at the Waterpower '97 specialty conference. This international conference on hydropower was held in Atlanta, Georgia, August...
Underwater Magic
Applications of geomembrane systems to arrest concrete deterioration and control leakage in hydraulic structures have been accomplished, with a few exceptions, in a dry environment by...
Return to search