Design of Composite Slabs for Vertical Shear
Three major modes of failure should be considered in the design of the positive moment regions of composite slabs incorporating profiled steel sheeting, viz.: flexure, longitudinal slip...
Investigation of Corners and Joints Applied to a Steel-Concrete Composite Caisson
We have developed a caisson composed of steel-concrete composite slabs and steel structures, which we call a `Hybrid Caisson.' We studied the structural principles and usability of the...
Development of Composite Slab with Truss-Typed Shear Connectors
This paper describes the results of the test on a steel-concrete composite slab with truss-typed shear connectors. This composite slab was recently developed. A series of tests were conducted...
Connection of Beam Flange to Concrete-Filled Tubular Column
Research has been carried out on a frame composed of a concrete-filled steel tubular column and H-shaped steel beam with the aim of developing a reasonable connection method. The proposed...
Thin Walled Circular Concrete Filled Steel Tubular Columns
The thin walled steel tube filled with high strength concrete delivers the economies of a concrete column with the speed of construction and the constructability of a steel column resulting...
Strength and Stiffness Behavior of Composite Steel Grid Decks
This paper briefly discusses the historical development of composite steel grid decks. The static and fatigue behavior under bending of filled and unfilled steel grid decks (exodermic)...
Influence on Steel Deck on Composite Beam Strength
Results of a recent study were described in which 7 push-out tests and 4 composite beam tests were conducted. The results were consistent with other recent studies reported in the literature,...
Composite Beams with Headed Studs in Narrow Ribbed Metal Deck
This paper presents the results of sixteen push-out tests conducted to study the behavior of headed stud connectors in composite beams with narrow ribbed metal deck placed parallel to...
Strength Deterioration Behavior of Concrete-Filled Steel Tubular Beam-Columns
Cantilever beam-columns of steel square hollow section with or without filled-concrete were tested under constant axial load and alternately repeated horizontal load to investigate the...
Perfobond Rib Connectors for Composite Beams
In this paper, the influence of concrete strength, transverse reinforcement and concrete dowels on the capacity of perfobond rib shear connectors is examined. Perfobond rib connector is...
The Behaviour of Reinforced Concrete Beams Manufactured with Side Profile Sheets
The paper describes in qualitative terms the fundamental principles that control the behaviour of a completely new form of construction in which reinforced concrete beams are constructed...
Ovality in Pipe Rehabilitation Design
Pipes in need of structural rehabilitation often have longitudinal cracks (at the crown and elsewhere) and exhibit significant ovality (5-10%). When these pipes are lined with current...
Townsite Lateral-Stage 2 Belle Fourche Unit - Cheyenne Division Concrete: Pipe with Dumped Bedding and Embedment
In 1933, M. G. Spangler presented three bedding configurations and the concept of a bedding factor to relate the supporting strength of buried concrete pipe to the strength obtained in...
Durability of High Performance Concrete
The freeze-thaw durability and the resistance to chloride penetration of high performance concrete (HPC) developed for highway applications were investigated. This paper summarizes the...
The Proof is in the Pavement
A technique known as statistical quality assurance (SQA) lets DOTs quantify pavement quality by setting statistical guidelines for the work they will accept. SQA is a distinct departure...
Use of High Strength By-Product Gypsum Bricks in Masonry Construction
A new research aimed at producing high strength masonry bricks to be bonded with several types of joint materials other than conventional cement mortar, is introduced in this paper. This...
Use of CLSM Fly Ash Slurry for Underground Facilities
This paper presents the results of research performed in developing and using flowable fly ash slurry which falls under the classification of Controlled Low Strength Material (CLSM) as...
Airfield Pavement Structural Evaluations, Current Practice and Future Needs
The United States Air Force's pavement evaluation teams have to be able to go quickly anywhere in the world to evaluate an airfield pavement's structural capability. A combination of non-destructive...
Lime Treatment of Asphalt Mixtures in Improving Resistance to Moisture
Airport flexible pavement is susceptible to moisture damage. Lime treatment of asphalt pavement is considered to be an effective method in improving resistance to moisture. It has been...
Flyash Stabilization of Tropical Hawaiian Soils
A preliminary study of soil improvement/stabilization of several tropical Hawaiian soils with locally generated high quality flyash admixtures has shown tremendous potential as an economical...
Return to search