Oilcrete
Threatened by probable tightening of hazardous-waste legislation, oil companies are searching for ways to dispose of or stabilize oil-drilling byproducts. One way is cementitious stabilization...

Keeping Tabs on Toxic Spills
EPA estimates on the number of hazardous material accidents in the past five years range widely from 7,000 accidents to 20,000, primarily because information on these accidents is so poorly...

Structuring a Microcomputer Based Pavement Management System to Enhance the Probability of Adoption and Continued Use
Diffusion of innovation concepts were used to help structure a microcomputer based pavement management system (PMS) for use by local agency public works personnel in the San Francisco...

Modeling and Data Uses in Hydraulic Transport Investigations, New Bedford Estuary, Mass.
Field measurements, laboratory tests, and models were used together to make transport predictions for the sediments and dissolved materials which would be released by proposed dredging...

Concrete Pipe Trenchless Technology
Precast reinforced concrete pipe is the most commonly used pipe material for jacking operations. For over 90 years, concrete pipe techniques, procedures and applications established the...

Education and Continuing Development for the Civil Engineer
Setting the Agenda for the 90's and Beyond
The 1990 Forum Proceedings is a collection of papers that were written to provide a basis for deliberation and conclusions at the ASCE 1990 National Forum on Education and Continuing Development...

Pipeline Design and Installation
The proceedings of the International Conference on Pipeline Design and Installation, held on March 25-27, 1990 in Las Vegas, Nevada, presents information on all aspects of pipeline design...

Sounding Out Buried Waste
Geophysical diffraction tomography (GDT) is a new remote sensing technique for quantitative high-resolution subsurface imaging. It is similar to optical holography where long wavelength...

On the Drawing Board
Reliable and quantitative nondestructive evaluation (NDE) methods for construction materials of wood, concrete, masonry and structural steel are needed. NSF program director John Scalzi...

Access Tube Characteristics and Neutron Meter Calibration
Neutron meter calibration was found to be influenced by material type, thickness and size of access tube. Meter counts were decreased by an average of 15% for a 20% increase in tube diameter...

Relationship of Soil Type and Chemicals to the Calibration of Neutron Meters
Theory of neutron scattering and moderation in matter explains many of the characteristics of calibration curves of neutron moisture probes. Characteristics include effect of atomic species...

Computation of Unsaturated Soil Parameters Using Upward Infiltration Empirical Data
The relationship between soil moisture content and hydraulic conductivity with the soil tension be defined to simulate unsaturated flow in a porous media. Direct measurements of these...

Movement of Triazine Herbicides and Metolachlor in a Sandy Soil
The movement of atrazine, cyanazine, simazine, and metolachlor was studied in an Evesboro loamy sand soil. Both no-tillage and conventional tillage treatments were used. Atrazine, simazine,...

Design of Steel Transmission Pole Structures
Design of Steel Pole Transmission Structures, ASCE Manual No. 72, provides a uniform basis for the design and fabrication of steel pole structures....

Engineering, Construction, and Operations in Space II
This proceedings, Engineering, Construction and Operations in Space II, consists of the 165 papers presented at Space 90, the Second International...

Rheological Analysis of Fine-Grained Natural Debris-Flow Material
Experiments were conducted on large samples of fine-grained material (?2mm) from a natural debris flow using a wide-gap concentric-cylinder viscometer. The rheological behavior of this...

Flume Experiments on Debris Flow
With the different characteristics of grain motion in debris flow, three layers are vertically divided, i.e., viscous collision layer, inertial collision layer and suspension layer. Both...

Unsteady Flow of Bingham Viscoplastic Material in an Open Channel
An analytic solution for transient flow of a Bingham viscoplastic material in an open channel is presented. The solution for the response to a time-varying pressure gradient predicts shear...

Some Aspects of the Mechanism of Debris Flow
As the first step of the development of a general two-phase flow model for debris flows, a simple granular model, which is considered as a special case of the two-phase flow model, is...

Armor Layer Evolution
This communication presents an analysis of celerity propagation for non-uniform materials. Based on the corresponding flow, sediment transpot and sorting/armoring equations, the celerity...

 

 

 

 

Return to search