San Francisco Double-Deck Viaduct Retrofits
Following the Loma Prieta Earthquake in October 1989, six double-deck reinforced concrete viaducts in San Francisco were closed because of some isolated damage, and as a precaution for...
Retrofitting Northwest Connector for Seismic Forces
Many pre-1971 bridges in California have inadequate seismic resistance due to non-ductile components or poor connectivity of superstructure elements. Caltrans has finished the first retrofit...
Lifeline Design of Bridges
An analysis and design procedure is presented for retrofitting steel girder bridges that may experience the loss of a pier or column. Multispan and continuous grider bridges are treated....
Bridge Seismic Retrofit Prioritization
This paper describes a mathematical model developed to produce an index by which bridges in a network can be prioritized systematically for seismic retrofitting. The model incorporates...
Screening Procedures for the Retrofit of Bridges
Since the October 1989 Loma Prieta Earthquake in Northern California, interest has revived in seismic criteria for both new design and the retrofit of existing highway bridges. This interest...
Scenario for Improving the Seismic Resistance of Pipelines in the Central United States
A number of pipelines transporting crude oil and natural gas to the Midwest and Northeast pass within and adjacent to the New Madrid seismic zone in the central United States. A major...
Tension Bending Behavior of Buried Pipelines Under Large Ground Deformations in Active Faults
This paper deals with the tensile failure of buried pipelines subject to abrupt fault movements. The pipe is modeled as a thin cylindrical shell which is essentially semi-infinite. The...
Seismic Behavior of Buried Pipelines Through Field Observation
This paper presents seismic response characteristics of embedded pipes based on field measurements. Strains induced in steel pipe and ductile pipes with expansion joints are studied. Special...
Seismic Design Practices for Power Systems: Evolution, Evaluation, and Needs
The evolution of seismic design practices in electric power systems is reviewed. In California this evolution had led to many installation practices that are directed at improving the...
Design of Substation Foundations for Liquefaction
When substation foundations penetrate liquefiable strata within risk prone seismic regions, the potential loss of support must be evaluated with state-of-the-art methods to determine foundation...
A Study of Shield Tunnel's Earthquake Prevention Under a Big Earthquake
Currently, the most commonly used approach for determining the aseismicity of a shield tunnel is the 'Response Displacement Method.' This is based on analysed...
Telecommunications Facilities Earthquake Readiness Since San Fernando
The vertical rack architecture of telecommunication offices showed some weaknesses during the San Fernando earthquake in 1970. Efforts have been made since then to improve performance...
Seismic Vulnerability Assessment of Seattle Water Department's Water System Facilities
The Seattle Water Department (SWD) service area and watersheds lie in seismic zone 3, in which there is potential for major earthquakes (Richter magnitude 7.5 or greater). The SWD system...
Seismic Analysis and Design of Buried Piping
Among the causes of damage to buried pipelines due to earthquakes, the one that is most complicated to analytically deal with and that is most credible at safety related sites such as...
Spectral Shapes and Amplifications for the Loma Prieta Earthquake of October 17, 1989
The 1971 San Fernando earthquake provided engineers and seismologists with the largest number of strong motion accelerograms ever recorded for an earthquake at that time. Those records...
Liquefaction Hazard Analysis for Design of the Kern River Pipeline at the Muddy River Crossing, Southern Nevada
The 91.4-cm (36-in.) diameter Kern River natural gas transmission pipeline will cross the Muddy River in Moapa Valley, about 5 km west of Glendale, Nevada, in an area of relatively low...
Seismic Hazard Analysis of Buried Pipeline for Design
This paper concerns mainly the following three items on seismic hazard analysis of buried pipeline for design: (1) effects of pipeline length on risk, (2) effects of local site conditions...
Reliability of Highway Bridge Columns Under Earthquake Loading
Seismic design procedure for highway bridges normally specify that any inelastic action be confined to the columns. Concrete bridge columns are usually designed to resist an elastic force...
Seismic Behavior and Vulnerability of Pipelines
In this paper criteria and related features are described pertaining to the seismic design of pipelines and pipeline systems. The presentation begins by describing the past performance...
Seismic Design Criteria for Transportation Structures
Seismic criteria for the design of transportation stuctures have evolved slowly since their inception in the early 1940s. Although seismic design criteria are far more sophisticated than...
Return to search