Guide for the Design and Use of Concrete Poles
Prepared by the Concrete Pole Task Committee of the Committee on Electrical Transmission Structures of the Structural Division of ASCE. This guide presents...
Spanning the Seas
A proposed structural scheme, called the V�tower system, could cross vast stretches of water with record length spans yet use only conventional materials. An example is a bridge proposed...
Water Jets: Concrete Yes, Tunneling Maybe
High pressure water jets are demolishing concrete from bridge and parking decks, faster and at lower cost than by traditional means. The technique is fast becoming an acceptable option....
Pipelines for Flexible Deliveries
The use of pipelines facilitates flexible deliveries for projects and flexible distribution on the farm. Pipelines have the advantage relative to canals in that they do not have to follow...
Pipeline Types and Design Considerations
Pipelines are extensively used to upgrade irrigation delivery facilities. The advantages of a pipeline system include an improvement in water conservation and the ability to extend water...
Design of Semi-Closed Pipeline Systems
Semi-closed pipeline systems controlled by downstream activated float valves permit low pressure pipeline systems to communicate information from the outflow location back to the source...
Case Study?Closed Pipeline Systems
The paper discusses closed pipeline system and its automation, including variable pumping rates, sensing devices, automatic controls, pressure regulators, flow measuring devices, surge...
Case Studies?Semi-Closed Pipeline Systems
The paper discusses the title subject in terms of automated systems, flexible scheduling, and system components. Project locations include the Mahaweli Development Project, Sri Lanka;...
Case Study?Open Pipeline System, Coachella Valley Water District
A supervisory canal control system installation was started in 1966, seventeen years after start up, and a major upgrading was completed in 1983. The canal delivery system now has a central...
Yakima-Tieton Irrigation District Rehabilitation Program
The Yakima-Tieton Irrigation District obtained funding from the U. S. Bureau of Reclamation and the State of Washington to replace an open canal and lateral irrigation delivery system...
Stepped Spillway Design with a RCC Dam
The hydraulic model study results for the Upper Stillwater stepped spillway design are presented. The studies encompassed several spillway geometries and design unit discharges ranging...
Hydraulic Design Limitations for Gravity Flexible (Non-Rigid) Plastic Pipes Flowing with a Free Water Surface
Hydraulic design limitations are necessary for gravity plastic pipes when designed for use as a sanitary sewer, flowing part full with a free water surface. The limitation for pipes designed...
Parametric Analysis of Concrete Gravity Dams using Finite Element Analysis
More sophisticated means of analyses have been investigated to determine the accuracy and applicability of conventional methods to a range of parameters affecting stability. This paper...
Rehabilitation Measures?Wanaque Reservoir System
The rehabilitation of Pompton Lake Dam and the dams of the Wanaque Reservoir System has provided the North Jersey District Water Supply Commission with a safe, dependable source of water...
Rehabilitation of Williams Bridge Dam
Pennsylvania Gas and Water Company initiated construction work to upgrade the 90-year old dam in order to meet current dam safety standards with emphasis on satisfying Probable Maximum...
Hydraulic Design of Pamo Dam Spillway
The design of the emergency spillway for the San Diego County Water Authority's (SDCWA) proposed Pamo Dam is discussed. Pamo Dam is a 264-foot (80. 5 meter) high roller compacted...
Minimum Energy Loss and Velocity Profiles in Pipes
Minimum energy loss in a flow is discussed. The concept is applied to derive velocity distributions for laminar flow through a circular pipe and steady uniform turbulent flow through a...
Joint Consideration of Pipe Breakage and Pipe Flow Probabilities
Two issues of distribution network reliability, namely, probability of pipe failure and probability of the design flow being exceeded have been discussed. Expressions containing measures...
Water Distribution System Design by Chance-Constrained Model
The objective of this paper is to present an optimization model for the design of water distribution systems considering the uncertainty in required demands, required pressures, and pipe...
Model for the Optimal Rehabilitation and Replacement of Water Distribution System Components
The objective of the model presented is to determine the minimum cost solution, given the nonlinear nature of the equations required to describe the cost and the hydraulics of a water...
Return to search