A Comparison of Performances of Various Frictional Base Isolation Systems
The results of a comparative study of the performances of several frictional base isolation devices including the Sliding-Joint, the French System, and the Resilient-Friction isolators...
Frequency Response Design of Controlled Structures
The installation of optimal control systems has been shown to be effective in reducing the vibration responses of structures. In addition to the effectiveness, there are many factors that...
A Family of Concurrent Algorithms for Transient Finite Element Solutions
We derive a family of methods for solving the equations of motion arising in structural dynamics which makes effective use of the architecture of concurrent computers. The algorithm is...
A Portable Parallel Equation Solver for Finite-Element Based Structural Analysis-Synthesis Codes
Substructuring formulation using adjoint variable approach has been developed for design sensitivity analysis and optimizations of large scale structures. In this paper, a global-local...
Neural Network Approaches in Structural Mechanics Computations
The neural computing paradigm has not been extensively researched in terms of its applicability to a wide variety of structural engineering problems. At an intellectual level this research...
Computational Strategies for Finite Element Simulations on Supercomputers with 4 to 65,536 Processors
We present a general approach to the design of next generation finite element software. We describe several parallel computational strategies for both implicit and explicit computations,...
Finite Element Computations on a Linear Systolic Array
This paper describes a linear systolic architecture designed specifically for finite element computations. Examples of various sparse matrix and vector operations are given. Applications...
Parallel Computations for Automated Finite Element Modeling
This paper discusses initial efforts to combine an automatic mesh generator and element by element solution approaches to produce efficient parallel computational procedures on adaptively,...
Applications of Fuzzy Mathematical Programming in Structural Optimization
In this paper, several applications of fuzzy mathematical programming in structural optimization are reviewed and discussed. In addition, a formulation of optimum earthquake resistant...
A Study of the Precision of Optimum Design Using Suboptimization
As the scale of structures becomes larger and their configuration become more complicated, the design variables and constraint conditions increase, and numerical calculation of the optimum...
An Optimal Design of Steel Pipe Pile Foundation
This paper presents an optimal design method for the steel pipe pile foundation of bridge pier using a nonlinear programming. It is firstly assumed that an imaginary wall model behaves...
Optimization of Cable Prestresses of Cable Stayed Bridges Based on Minimum Strain Energy Criterion
In this study, an attempt is made to determine the optimum cable prestresses based on the strain energy criterion. The validity of the strain energy criterion on the optimum cable prestresses...
Two-Level Optimization of Nonlinear Structures
This paper presents several optimization design problems and their applications to both cable structures and geometrically nonlinear braced-rib arches. The sum of squares of residuals...
Total Optimization of Truss Considering Shape, Material and Sizing Variables
A total optimum design method is developed for truss structures in which the shape of the structure, discrete material kinds and cross-sectional areas of member elements are optimized...
Nonlinear Structural Analysis by Complementary Energy Minimization
New analysis methods for truss and continuous beam considering material nonlinearity are developed on the basis of the principle of minimum complementary energy and mathematical programming...
Shape Optimization of Joints of Steel-Framed Diaphragm Wall
Shape optimization system of the joints of the steel-framed diaphragm wall (abbreviated as steel diaphragm wall) is discussed. The optimization problem is formulated as the minimum cost...
Modeling of Plate and Shell Structures with
Finite element models for the analysis of plates and shells, based on the concept of hp-extension are presented. A methodology for the control and analysis of the error of the finite element...
Plates and Shells with Crack-Like Flaws
The formulation of new hierarchial finite elements for the analysis of laminated plates and shells in the presence of flaws are discussed. The performance of the elements is evaluated...
p-Version of FEM and Shape Optimal Design
This paper presents some research results obtained recently in using the p-version of the finite element method (FEM) for shape optimal design. It is shown that the p-version 2-D elastic...
Stress Computations for Nearly Incompressible Materials
Computation of stresses by the finite element method (FEM) in the case of nearly incompressible isotropic elastic materials is discussed. It is shown that for moderately high Poisson's...
Return to search