A Two-Stage Safety Assessment Methodology for Construction Activities
The control of construction activities requires the evaluation of the condition of the control attributes of interest. In order to develop the required methodology, a model of the construction...
Holistic Approach to Irrigation Management in Developing Countries
Sound development of irrigation and drainage projects in developing countries is a continuing need to reduce hunger, environmental degradation and excess population growth; and to promote...
Metrication of Construction?A Message to the American Society of Civil Engineers
The author discusses the reasons for metrication of the U.S. construction industry, describes the Canadian experience in this area, and outlines the necessary steps to alleviate the metrication...
Design of Latticed Steel Transmission Structures
This standard,
A Monumental Task
The geotechnical consultants, structural engineer and contractor combined to overcome difficult soils, underground subway structures and buried utilities when building the foundations...
Cranes, Concrete, Construction...and Computers
Computers are already firmly entrenched in the design process. Now, they're touching all corners of construction. Applications range from traditional project management tasks...
The Evolution of an Environmental Monitor
After more than 40 years of planning, litigation, design and construction, one of the nation's most controversial highway projects is finished. The completion earlier this...
Container Terminal Planning: 2001
This paper highlights the technical, yet practical planning process and operations research methodologies used by the country's largest containership company to guide 21st Century container...
Gate Maritime Wharf and Intermodal Facility
Gate Maritime Properties (GMP) is a small private port located in Jacksonville, Florida. In November of 1989, Gate signed a long-term lease agreement with the U.S. Department of the Navy...
New Cruise Terminal for San Francisco
A new international Cruise Terminal is being developed at Pier 30-32 in San Francisco, to replace present inadequate facilities at Pier 35. The Cruise Terminal will be developed as part...
Vacuum Alumina Unloader for Port of Everett
The Port of Everett is in the process of rebuilding and expanding its marine cargo facilities. Much of the Port's waterfront land and facilities were lost to the U.S. Navy Carrier Homeport...
Technology?Key to Environmental Success
A three million ton per year coal unloading terminal with 5 km overland conveyor at Jacksonville, Florida, incorporates numerous technical advances to achieve environmentally safe construction...
Pile Installation and Testing at Ningbo Port, China
As part of an ambitious development program at the Port of Ningbo, the People's Republic of China constructed a 694 m (2277 ft) long offshore pier structure to provide a container berth...
Analysis of a Wharf for a Container Terminal
A balanced combination of sophisticated computer programs was employed to model the soil strata, foundation and structure of a wharf for a new container terminal in the Port of Topolobampo,...
Deep Water Container Wharf & Crane Foundation
A deep water anchored steel bulkhead and a parallel-independent low-profile, pile supported crane rail foundation with special stowage areas are discussed from soils investigation, through...
Design of Marina Replacement Facilities
A majority of the waterfront design projects within the State of California are for the replacement of existing facilities since the densely populated shoreline areas are already heavily...
Securing Strategic National Security Objectives Through Maritime Activities
The President's national security strategy envisions a healthy and growing economy, wise environmental stewardship and a strong military as part of his plan to meet and to fulfill the...
Seismic Rehabilitation of Seattle's Pier 69
The Port of Seattle, one of the largest on the west coast of North America, made a strong statement regarding their support for reusing existing structures when a decision was made to...
Analysis of Dredged Material Deposition Patterns
Between November 1, 1989 and 30 March, 1990, nearly 1 million cubic yards of dredged material were disposed in Puget Sound as the first phase (Element I) of the construction of the Navy's...
Pre-Compression of Concrete Breasting Dolphins Solves Construction Problem
A roll-on/roll-off ferry terminal was built in Quincy, Massachusetts in 1989 as part of a marine transportation system to support construction of the sewage treatment facilities proposed...
Return to search