An Irrigation Allocation Planning Model
An irrigation allocation model using multiperiod linear programming was developed to recommend canal water allocation among different irrigated fields to maximize net annual benefits for...
A Flexible Expert System Based Typology of Irrigation System Types
This paper describes an approach developed to classify irrigation systems into categories. It discusses the general problem of developing a typology of irrigation systems and proposes...
Development of a Hydrological Database for PROSIM?A Water Rights-Based Operational Simulation Model of the Provo River
The development of a hydrological database for a computer model of the hydrology, water rights, and operations of the Provo and Weber rivers is described. The model uses all pertinent...
FLUME 3.0: A Computer Program for Designing Flumes and Weirs
Long-throated flumes and broad-crested weirs are becoming the preferred measuring devices for use in irrigation canals. A computer program for calibrating these flumes and weirs has been...
CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...
AZSCHED?Software for Real-time Irrigation Scheduling
A user-friendly computer based scheduling program was developed to minimize the amount of data which needs to be input by the user by utilizing a network of twenty automated weather stations...
Flow Simulation for Surface Irrigation Design
Experience shows that even the most sophisticated and accurate computer models of the surface-irrigation process will not be widely used by design agencies unless they manifest a certain...
Software Engineering for Irrigation and Environmental Applications
Interactive, user-oriented software has been developed to enhance irrigation design, management and planning. Environmental applications were the central focus of several individual components...
Radiation Balance and Soil Water Evaporation of Bare Pullman Clay Loam Soil
Radiation and energy balance components and soil water evaporation were measured for a bare Pullman clay loam soil at Bushland, TX during the 1992 spring and summer as the soil dried following...
Revision of Oregon Crop Water Use and Irrigation Requirements
A project to revise the crop water use estimates and irrigation requirements for the state at Oregon is described. The FAO modified Blaney-Criddle method was applied in this project since...
Streamflow Depletions Resulting from Ground Water Transfers
An application to move the point of diversion of a quasi-municipal ground water right from about 4.8 km to a second well about 0.3 km from a river channel was made in the Reno/Sparks,...
Multiquadrics in Engineering Modeling
The theory of multiquadrics (MQ) is advancing rapidly and it is usable today. When appropriate MQ can accurately interpolate for unknown values with less computational cost than Kriging....
Computing in Civil and Building Engineering
This proceeding consists of papers presented at the Fifth International Conference on Computing in Civil and Building Engineering held in Anaheim, California, June 7-9, 1993. The proceedings...
Computer Scheduling and Construction Specs
As recently as the early 1980s, employing computers in critical path method (CPM) scheduling was a formidable decision demanding considerable commitment of time and resources by management....
Establishing a Drought Reserve Policy for the Monterey Peninsula Water Management District
The Monterey Peninsula Water Management District was created by the California Legislature in 1977 for the purpose of developing an integrated management program for all of the water resources...
Parameter Estimates for a Groundwater Model
This paper presents a parameter sensitivity study of a two dimensional flow and transport model of a contaminated site. Hydrogeological and site data from previous investigations were...
Simulation of Buoyant, Miscible Liquid Plumes in Heterogeneous Aquifers
Laboratory experiments have been conducted in a sand tank with a single heterogeneity into which NaNO3 is continuously injected. From samples along, across and over the depth of the tank...
An Overview of Methods to Delineate Capture Zones of Pumping Wells
Rainfall over the surface area of an unconfined aquifer, which contributes flow to a pumping well under Dupuit conditions, was estimated. Using a two-dimensional analytical model with...
A Semi-Discrete Element Approach to the River Ice Breakup and Jamming Process
A semi-discrete element approach was developed to simulate the whole river ice breakup and jamming process. In this approach, ice mass is treated as discrete elements, and the movement...
Adaptive Control of Unavoidable Hazardous Releases
This paper presents a procedure for the adaptive control of hazardous releases of toxic substances. In particular, the control strategy is aimed at deliberate releases from man-made storage...
Return to search